The image shown is for representation purposes only and may not reflect the actual product.
TOMAHAWK® 30K
K12038-3
Plasma cutter - 230V/1Ph - Output current: 30A @60%
Lincoln Electric Business Partner?
Sign in to view your priceDETAILS
Portable, flexible cutting power of up to 16 mm, powered from a standard 230V input supply, ideal for work on site.
Features
- Ultimate Portability – Internal air compressor enables operation in environments where external compressed air is not available.
- Continuous Output Control – Focus the arc for different material thickness
- Touch Start system – Reliable plasma arc initiation without high frequency
- Rapid Arc Restrike – Fast cutting through gaps, even expanded metal.
- Front Panel Purge Control – Makes it easy to set the air flow rate without initiating the plasma arc.
- Cool Operation, Long Consumable Life – New electrode and nozzle design save you money in the long run
- Added Safety – Our Parts-in-Place system detects correct installation of consumables and torch.
- Engine Drive Compatible – Select a Lincoln Electric Outback® or Vantage® to power your Tomahawk® in remote locations
Service Information
What's Included
- LC30 Torch with 4 m cable
- Internal air compressor (external air connection also standard)
- Air regulator and pressure gauge
- Internal water separator
- Work clamp and cable
- Spare consumables
- Shoulder strap
- Input power cord
You May Also Need
Specifications
Weights & Dimensions
| Dimensions (H x W x D) | 385 mm x 215 mm x 480 mm |
| Net Weight | 18,5 kg |
Technical Specifications
| Machines Processes | Plasma Cutting |
| Open Circuit Voltage | 396Vdc |
| Input Voltage | 230V±15% |
| Input Current | 16A |
| Input Hertz | 50/60 Hz |
| Input Phase | 1Ph |
| Input Power | 230/1/50-60 Hz (+/-15%) |
| Mode Icon | CC |
| Output Range | 15- 30A |
| Polarity | DC |
Features
| Ingress Protection Rating | IP23 |
| Work Lead Connector Type | Dinse |
Plasma Cutting Specifications
| Plasma Machines Process | Cutting |
| Torch Included | Yes |
| Torch Cooling | Air |
| Gas Pressure Required | 5,0bar – 6,0bar / 125 ±10% l/min |
| Recommended Cutting Capacity (Mild Steel) (mm/M) | 12mm |
| Maximum Cutting Thickness (Mild Steel) (mm/M) | 16mm |
| Maximum Severance (Mild Steel) (mm/M) | 20mm |
| Recommended Cutting Capacity (Stainless) (mm/M) | 12mm |
| Maximum Cutting Thickness (Stainless) (mm/M) | 16mm |
| Maximum Severance (Stainless) (mm/M) | 20mm |
| Recommended Cutting Capacity (Aluminum) (mm/M) | 12mm |
| Maximum Cutting Thickness (Aluminum) (mm/M) | 16mm |
| Maximum Severance (Aluminum) (mm/M) | 20mm |
Application
| Typical Application | Construction Dissimilar Metals Maintenance & Repair Structural Fabrication |
Warranty
| Warranty | 2 years |