Project Spotlight

Project Spotlight | October 3, 2018 | United States



Jimmy DiResta demonstrates how to design and build large workshop doors capable of accommodating oversized equipment while maintaining durability and functionality.

Project Spotlight Department Header


SAFETY FIRST

Before you start any project involving welding, make sure you have the right Personal Protective Equipment (PPE), which includes, at least, an ANSI-approved welding helmet, safety glasses, appropriate welding gloves for the process you’re using, and a flame-resistant shirt, jacket, or sleeves to protect from UV rays and burns. You should also keep a fire extinguisher close at hand. Use adequate ventilation when welding. Use an approved respirator if exposure to welding fume cannot be controlled, or if welding outside and natural air movement is not sufficient to keep welding fume out of your breathing zone.


image

Big doors for big projects in your barn-sized workshop

Jimmy Diresta, the subject of this month’s ARC cover story, has spent more than a year building out a space to hold classes, maker events and otherwise flex his creative muscles. Just in time for more inclement weather, the “Maker Church,” as it’s been dubbed, is finally water-tight, but not quite secure. In this Project Spotlight, Jimmy builds and installs massive doors for the openings of each end of the building large enough to accommodate the delivery of heavy machinery and large objects. Within these larger doors, he adds man-doors for day-to-day use.

This is a custom project, so if you want to build it, you’ll have to size your materials accordingly. For his project, Jimmy is using reclaimed lumber for the wood panels and 4 x 4 x 3/16 inch angle iron for the frames and casing. A video of the build can be found at www.arcmagazine.pub

image

Step 1: The Door Casing

Like any other door, this set of barn doors needs to have something for each side of the hinges to be mounted to. We cut each “leg” of the casing as well as the “head” piece from 4 x 4 angle iron stock, and pre-drilled and countersunk each screw hole on the ground, where gravity was our ally, prior to mounting them to the door framing using structural deck screws.

image

Step 2: Outer Door Frames

Measuring the door opening with the casing in place gave us the most accurate dimensions for the larger outer doors. With these measurements in hand, we clamped each length of angle iron in place using a pair of heavy duty squares and tacked them at each corner. We then took diagonal measurements to ensure the assembly was square, adjusted as needed, then finish welded each joint.

image

Step 3: Inner Door Frames

Using the same process as we did for the outer doors, we built the inner doors to be roughly half the width of the outer doors, taking care to ensure that the framing for the outer doors would act as a stop for the inner doors.

image

Step 4: Inner Door Hinges

We trimmed heavy-duty strap hinges (purchased from our local farm supply store) to make the connection between the inner door and the outer door frames, cutting them to size and reinforcing the hinge with scrap pieces of 3/16” steel before welding them into place.

image

Step 5: Outer Door Hinges

With the inner doors connected to the outer doors, it was time to connect the door assemblies to the casing. For our project, we custom built our hinges for using interlocking lengths of solid, round bar stock, fabricated using a metal lathe (see video). Recognizing that not everyone has this equipment on hand, similar bullet-style hinges can be readily purchased online.

image

Step 6: Door Panels

Our door panels were assembled from reclaimed lumber that we had in the shop, but whether you create your doors using dimensional lumber or plywood, the process is largely the same. First, arrange your pieces so the bottom edges are all even and squared up. Using several boards of the same width as each half of the door, attach each vertical board to the horizontal boards using screws or a combination of construction adhesive and nails. From this large panel, cut out a piece that will serve as the filler panel for your smaller inner frame.

image

Step 7: Install Panels

Hoist the panels into place and secure them to the frame. In this project, we used small clamps to hold the panel in place, then welded small pieces of angle iron were welded to the door frames to hold them in a more permanent way.

image

Step 8: Install Locks, Latches and

Slide Bolts Once the panels are installed and secured, and you’re happy with the alignment of the doors within your openings, it’s time to think about how you’ll keep them closed and secured. Methods can be as simple or as complex as suits your needs. 

image
image
image
image
A Small Trailer for Hauling Pallets

Materials

Main Frame: 4 x 4 x ¼” Angle iron
Various pieces of angle iron and steel
strapping
Wood for door panel
Gate hinges
Bullet hinges – 1½ inch cold rolled round steel
and 1 inch stainless steel for hinge pin

Welding/Cutting Equipment and Tools

Lincoln Electric Power MIG® 260
Lincoln Electric Power MIG® 210 MP
Lincoln Electric Ranger® 250 GXT
Flux cored wire
Large welding/clamping square
Drill
Angle Grinder
Cutting and flap disks