L'image affichée est à des fins de représentation uniquement et peut ne pas refléter le produit réel.
Détails
Traits
- Good slag removal
- Deep penetration and fast freezing
- Fast travel speed and flatter contour fillets deliver
- AC Polarity
Applications typiques
- Small AC welders welding on galvanized steel
- Automobile Frames
- Storage tank
- piping
- Rusty or oily steel in maintenance or repair work
Positions de soudage
- All
Gaz de protection
- Not Applicable
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.1 | E6011 |
| ABS | AWS A5.1 | E6011 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|
| E6011 Requirement | 330 (48) min. | 410 (60) min. | 22 min. | 27 (20) min. | |
| Typical Result, As-welded | 380-460 (56-66) | 470-550 (68-80) | 22-38 | 37-111 (27-82) | 78-87 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V | %Mn+Ni+Cr+Mo+V |
|---|---|---|---|---|---|---|---|---|---|---|
| E6011 Requirement | 0.20 max. | 0.20 max. | 1.20 max. | 0.30 max. | 0.30 max. | 1.00 max. | 0.08 max. | |||
| Typical Result | 0.10-0.13 | 0.02-0.07 | 0.47-0.77 | 0.01 max. | 0.01-0.04 | 0.007-0.012 | 0.005-0.010 | 0.15-0.39 | 0.01 max. | 0.58-0.81 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 3/32 in (2.4 mm) | AC | 50-90 |
| 1/8 in (3.2 mm) | AC | 80-130 |
| 5/32 in (4.0 mm) | AC | 120-180 |
| 3/16 in (4.8 mm) | AC | 140-220 |