Détails
Traits
- Light slag for minimal arc interference
- Deep penetration
Applications typiques
- Hot pass welding of up to X80 grade pipe, when followed by low hydrogen fill and cap
- API 5L X70 through X80 grade pipe
Positions de soudage
- All
Disclaimers
Des informations de service
Vous pourriez également avoir besoin
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5/A5.5M: 2006 | E9010-G |
| ASME | ASME SFA-A5.5 | E9010-G |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -29°C (-20°F) |
Charpy V-Notch
J (ft-lbs) @ -46°C (-50°F) |
|---|---|---|---|---|---|
| E9010-G Requirements | 530 (77) min. | 620 (90) min. | 17 min. | ||
| As-welded Typical Result | 530-605 (77-88) | 620-690 (90-100) | 17-29 | 45-94 (33-69) | 28-62 (21-46) |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|
| E9010-G Requirement⁽¹⁾ | 0.30 min. | 1.00 min. | 0.20 min. | 0.50 min. | 0.03 max. | 0.03 max. | 0.80 min. | 0.10 min. | |
| Typical Result | 0.13-0.18 | 0.01-0.06 | 0.55-0.79 | 0.43-0.70 | 0.66-0.77 | 0.01-0.02 | <0.01 | 0.08-0.22 | <0.01 |
TYPICAL OPERATING PROCEDURES
| Classification | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 3.2 mm (1/8 in) | DC+ | 75-130 |
| 4.0 mm (5/32 in) | DC+ | 80-185 |
| 4.8 mm (3/16 in) | DC+ | 140-225 |
NOTES
| Note |
|---|
| ⁽¹⁾ In order to meet the alloy requirements of the “G” designation, the undiluted weld metal shall have the minimum of at least one of the elements listed. |