Menu Close
50 lb Can of Lincoln Electric Stick Electrodes
L'image affichée est à des fins de représentation uniquement et peut ne pas refléter le produit réel.

Diameters / Packaging

Diameters
 50 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED029511
3/16 x 14 in (4.8 x 350 mm) ED029509
5/32 x 14 in (4.0 x 350 mm) ED029513

Shield-Arc® HYP+

Stick (SMAW)

AWS:
E7010-P1
E7010-G

Low Alloy, Cellulosic, Pipe • AWS E7010-P1 also meets AWS E7010-G

Diamètre

Sélectionnez le diamètre

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (4.8 x 350 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Paquet

Sélectionnez un forfait

  • 50 lb Easy Open Can
Acheter maintenant

Détails

Traits

  • Light slag for minimal arc interference
  • Deep penetration
  • Clean, visible weld puddle
  • Superior puddle control

Applications typiques

  • Hot, fill and cap pass of up to X65 grade pipe
  • Root pass welding of up to X80 grade pipe

Positions de soudage

  • All positions

Gaz de protection

  • Not Applicable

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc HYP+

ED029511
50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc HYP+

ED029513
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030826
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030827
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030828
K2394-1-Stick Electrode Holder & Cable Assembly Kit

Stick Electrode Holder and Cable Assembly (Twist Mate™)

K2394-1
K704 Accessory Kit

Accessory set 400A

K704
Heavy Duty Leather Welding Jacket

Heavy Duty Leather Welding Jacket - Large

K2989-L

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E7010-P1
ABS AWS A5.5 E7010-P1
CWB CSA W48 E4910-P1

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E7010-P1 Requirement 410 (60) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 430-490 (62-70) 530-580 (76-85) 22-29 27-96 (20-71)

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E7010-P1 Requirement 0.20 max. 0.30 max. 1.20 max. 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.60 max. 0.10 max.
Typical Result 0.08-0.16 0.01-0.04 0.43-0.53 0.26-0.33 0.01-0.04 0.01 0.01 max. 0.06-0.18 0.005 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
1/8 in (3.2 mm) DC+ 75-130
5/32 in (4.0 mm) DC+ 90-185
3/16 in (4.8 mm) DC+ 140-225