Menu Close
Lincoln Stainless Cut Length TIG Electrode
L'image affichée est à des fins de représentation uniquement et peut ne pas refléter le produit réel.

Diameters / Packaging

Diameters
 10 lb (4.5 kg) Plastic Tube
1/8 in (3.2 mm) TG413125638
1/16 in (1.6 mm) TG413062638
3/32 in (2.4 mm) TG413093638

Techalloy® 413

TIG (GTAW)

AWS:
AWS ERCuNi

TECHALLOY® 413 Tungsten Inert Gas Rod designed for MIG and TIG of 70/30, 80/20 and 90/10 copper-nickel alloys applications.

Diamètre

Sélectionnez le diamètre

  • 1/8 in (3.2 mm)
  • 1/16 in (1.6 mm)
  • 3/32 in (2.4 mm)

Paquet

Sélectionnez un forfait

  • 10 lb (4.5 kg) Plastic Tube
Acheter maintenant

Détails

TECHALLOY® 413 ideal for MIG overlay on steel after a first layer with Nickel 208, preheating is generally not required for this product.

Traits

  • This filler metal can be used for MIG overlay on steel after a first layer with Nickel 208
  • Preheating is generally not required for this product
  • Q2 Lot® -Certificate showing actual wire composition available online

Applications typiques

  • Used for MIG and TIG of 70/30, 80/20 and 90/10 copper-nickel alloys
  • Maintenance and Repair
  • Overlay after first layer with Nickel 208

Positions de soudage

  • All

Gaz de protection

  • TIG 100% Argon

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.7 ERCuNi
ABS AWS A5.7 ERCuNi
CWB AWS A5.7 ERCuNi
MIL MIL-E-21562E RN67

WIRE COMPOSITION

Classification %Fe %Mn %P %Pb %S %Si %Ti %Cu+Ag %Ni+Co
ERCuNi Requirement 0.40 - 0.75 1.0 max. 0.02 max. 0.02 max. 0.01 max. 0.25 max. 0.20 - 0.50 Remainder 29.0 - 32.0
Typical Result 0.55 0.6 0.00 0.00 0.00 0.03 0.34 68 30.0