L'image affichée est à des fins de représentation uniquement et peut ne pas refléter le produit réel.
Diameters / Packaging
|
Diameters |
10 lb (4.5 kg) Plastic Tube |
|---|---|
| 1/8 in (3.2 mm) | TG825125638 |
| 1/16 in (1.6 mm) | TG825062638 |
| 3/32 in (2.4 mm) | TG825093638 |
Détails
TECHALLOY® 825 is ideal for welding the nickel-chromium-molybdenum-copper alloys. This alloy can be used for overlay cladding where similar chemical composition is required.
Traits
- Used for MIG and TIG welding of nickel-chromium-molybdenum-copper alloys
- Can be used to overlay cladding where similar chemical composition is required
- Q2 Lot® - Certificate showing actual wire composition available online
Applications typiques
- Used for welding the nickel-iron-chromium-molybdenum-copper alloy (ASTM B 423 having UNS number N08825) to itself
- General Fabrication
- Maintenance and Repair
Positions de soudage
- All
Gaz de protection
- TIG 100% Argon
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.14 | ERNiFeCr-1 |
| ABS | AWS A5.14 | ERNiFeCr-1 |
| CWB | AWS A5.14 | ERNiFeCr-1 |
WIRE COMPOSITION
| Classification | %Al | %C | %Cr | %Cu | %Fe | %Mn | %Mo | %P | %S | %Si | %Ti | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ERNiFeCr-1 Requirement | 0.20 max. | 0.05 max. | 19.5 - 23.5 | 1.5 - 3.0 | 22.0 min. | 1.0 max. | 2.5 - 3.5 | 0.03 max. | 0.03 max. | 0.50 max. | 0.6 - 1.2 | 38.0 - 46.0 |
| Typical Result | 0.05-0.08 | 0.01 | 22.9-23.0 | 1.5-2.5 | 25.2-26.4 | 0.4-0.6 | 3.0-3.1 | 0.01-0.02 | 0.003 max. | 0.15-0.17 | 0.8-1.1 | 44.3 |