Menu Close
Techalloy Stainless Stick Electrode
L'image affichée est à des fins de représentation uniquement et peut ne pas refléter le produit réel.

Diameters / Packaging

Diameters
 8 lb (3.6 kg) Easy Open Can
 10 lb (4.5 kg) Easy Open Can
1/8 x 14 in (3.2 x 355 mm) EL182125634
3/16 x 14 in (4.8 x 355 mm) EL182187634
3/32 x 12 in (2.4 x 305 mm) EL182093632
5/32 x 14 in (4.0 x 355 mm) EL182156634

Tech-rod® 182

Stick (SMAW)

AWS:
AWS ENiCrFe-3

TECH-ROD® 182 Stick Electrode is designed for dissimilar welding between nickel-chromium-iron alloys to mild steels or stainless steel.

Diamètre

Sélectionnez le diamètre

  • 1/8 x 14 in (3.2 x 355 mm)
  • 3/16 x 14 in (4.8 x 355 mm)
  • 3/32 x 12 in (2.4 x 305 mm)
  • 5/32 x 14 in (4.0 x 355 mm)

Paquet

Sélectionnez un forfait

  • 8 lb (3.6 kg) Easy Open Can
  • 10 lb (4.5 kg) Easy Open Can
Acheter maintenant

Détails

TECH-ROD® 182 is ideal for oxidation resistance and high temperature strength applications, as well as used for dissimilar welding between nickel-chromium-iron alloys.

Traits

  • Ideal for oxidation resistance and high temperature strength
  • Wide range of applications
  • Q2 Lot® - certificates showing actual deposit composition available online

Applications typiques

  • Used for welding nickel-chromium-iron alloys to themselves
  • Used for dissimilar welding between nickel-chromium-iron alloys to mild steel or stainless steel

Positions de soudage

  • Polarity DC+

Gaz de protection

  • N/A

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.11 ENiCrFe-3

MECHANICAL PROPERTIES

Classification Tensile Strength
MPa (ksi) 		Elongation
%
ENiCrFe-3 Requirement 550 (80) min. 30 min.
Typical Result, As-welded 600 (88) 35

DEPOSIT COMPOSITION

Classification %C %Cr %Cu %Fe %Mn %P %S %Si %Ti %Nb+Ta %Ni+Co
ENiCrFe-3 Requirement 0.10 max. 13.0 - 17.0 0.50 max. 10.00 max. 5.0 - 9.5 0.03 max. 0.015 max. 1.0 max. 1.0 max. 1.0 - 2.5 59.0 min.
Typical Result 0.04 15.0 0.02 8.52 5.7 0.02 0.004 0.3 0.1 1.2 68.9

TYPICAL OPERATING PROCEDURES

Diameter Current
Amps
3/32" (2.4 mm) 65-85
1/8" (3.2 mm) 80-110
5/32" (4.0 mm) 100-140
3/16" (4.8 mm) 110-160