Menu Close
Techalloy Stainless Stick Electrode
L'image affichée est à des fins de représentation uniquement et peut ne pas refléter le produit réel.

Diameters / Packaging

Diameters
 8 lb (3.6 kg) Easy Open Can
 10 lb (4.5 kg) Easy Open Can
1/8 x 14 in (3.2 x 355 mm) EL190125634
3/16 x 14 in (4.8 x 355 mm) EL190187634
3/32 x 12 in (2.4 x 305 mm) EL190093632
5/32 x 14 in (4.0 x 355 mm) EL190156634

Tech-rod® 190

Stick (SMAW)

AWS:
AWS ENiCu-7

TECH-ROD® 190 Stick Electrode is designed for welding nickel-copper alloys to themselves and stainless steel.

Diamètre

Sélectionnez le diamètre

  • 1/8 x 14 in (3.2 x 355 mm)
  • 3/16 x 14 in (4.8 x 355 mm)
  • 3/32 x 12 in (2.4 x 305 mm)
  • 5/32 x 14 in (4.0 x 355 mm)

Paquet

Sélectionnez un forfait

  • 8 lb (3.6 kg) Easy Open Can
  • 10 lb (4.5 kg) Easy Open Can
Acheter maintenant

Détails

TECH-ROD® 190 can be used for overlay welding as well as for welding clad steels where nickel-copper surfacing is required.

Traits

  • Dissimilar applications include nickel alloys to copper-nickel alloys
  • Q2 Lot® - certificates showing actual deposit composition available online

Applications typiques

  • Welding nickel-copper alloys to themselves and to steel
  • Used for overlay welding as well as for welding clad steels nickel-copper surfacing is required
  • Welding nickel-copper alloys to themselves and stainless

Positions de soudage

  • Polarity DC+

Gaz de protection

  • N/A

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.11 ENiCu-7

MECHANICAL PROPERTIES

Classification Tensile Strength
MPa (ksi) 		Elongation
%
ENiCu-7 Requirement 480 (70) min. 30 min.
Typical Result, As-welded 490 (72) 43

DEPOSIT COMPOSITION

Classification %Al %C %Cu %Fe %Mn %P %S %Si %Ti %Ni+Co
ENiCu-7 Requirement 0.75 max. 0.15 max. Remainder 2.5 max. 4.0 max. 0.02 max. 0.015 max. 1.5 max. 1.0 max. 62.0 - 69.0
Typical Result 0.04 0.02 31 0.9 2.8 0.01 0.004 0.6 0.4 64.3

TYPICAL OPERATING PROCEDURES

Diameter Current
Amps
3/32" (2.4 mm) 65-85
1/8" (3.2 mm) 80-110
5/32" (4.0 mm) 100-140
3/16" (4.8 mm) 110-160