Menu Close
Lincoln Electric Stick Electrodes
L'image affichée est à des fins de représentation uniquement et peut ne pas refléter le produit réel.

Diameters / Packaging

Diameters
 8 lb (3.6 kg) Easy Open Can
 10 lb (4.5 kg) Easy Open Can
1/8 x 14 in (3.2 x 355 mm) EL276125634
3/16 x 14 in (4.8 x 355 mm) EL276187634
3/32 x 12 in (2.4 x 305 mm) EL276093632
5/32 x 14 in (4.0 x 355 mm) EL276156634

Tech-rod® 276

Stick (SMAW)

AWS:
AWS ENiCrMo-4

TECH-ROD® 276 Stick Electrode is designed for welding materials of similar chemical composition on applications.

Diamètre

Sélectionnez le diamètre

  • 1/8 x 14 in (3.2 x 355 mm)
  • 3/16 x 14 in (4.8 x 355 mm)
  • 3/32 x 12 in (2.4 x 305 mm)
  • 5/32 x 14 in (4.0 x 355 mm)

Paquet

Sélectionnez un forfait

  • 8 lb (3.6 kg) Easy Open Can
  • 10 lb (4.5 kg) Easy Open Can
Acheter maintenant

Détails

TECH-ROD® 276 provides excellent resistance to stress corrosion cracking and pitting and crevice corrosion due to the high molybdenum content. It can also be used for dissimilar welding between nickel base alloys and stainless steels, as well as for surfacing and cladding.

Traits

  • Due to high molybdenum content, this alloy offers excellent resistance to stress corrosion cracking and pitting and crevice corrosion
  • This low carbon, nickel-chromium-molybdenum tungsten alloy can also be used for dissimilar welding between nickel base alloys and stainless steels, as well as for surfacing and cladding
  • Q2 Lot® - certificates showing actual deposit composition available online

Applications typiques

  • Used for welding materials of similar composition

Positions de soudage

  • Polarity DC+

Gaz de protection

  • N/A

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.11 ENiCrMo-4

MECHANICAL PROPERTIES

Classification Tensile Strength
MPa (ksi) 		Elongation
%
ENiCrMo-4 Requirement 690 (100) min. 25 min.
Typical Result, As-welded 739 (107) 46

DEPOSIT COMPOSITION

Classification %C %Co %Cr %Cu %Fe %Mn %Mo %Ni %P %S %Si %V %W
ENiCrMo-4 Requirement 0.02 max. 2.5 max. 14.5 - 16.5 0.50 max. 4.0 - 7.0 1.0 max. 15.0 - 17.0 Remainder 0.04 max. 0.03 max. 0.2 max. 0.35 max. 3.0 - 4.5
Typical Result 0.02 0.1 15.1 0.00 6.0 0.7 15.5 59 0.02 0.00 0.1 0.03 3.8

TYPICAL OPERATING PROCEDURES

Diameter Current
Amps
3/32" (2.4 mm) 65-85
1/8" (3.2 mm) 80-110
5/32" (4.0 mm) 100-140
3/16" (4.8 mm) 110-160