L'image affichée est à des fins de représentation uniquement et peut ne pas refléter le produit réel.
Diameters / Packaging
|
Diameters |
(3) 10 lb Easy Open Can |
8 lb (3.6 kg) Easy Open Can |
10 lb (4.5 kg) Easy Open Can |
|---|---|---|---|
| 1/8 x 14 in (3.2 x 355 mm) | EL99125634 | ||
| 3/16 x 14 in (4.8 x 350 mm) | EL99161634 | ||
| 3/32 x 12 in (2.4 x 305 mm) | EL99093632 | ||
| 5/32 x 14 in (4.0 x 355 mm) | EL99156634 |
Détails
TECH-ROD® 99 provides more machinable weld deposit than Tech-Rod® 55, and is typically used for welding of cast irons to other cast irons as well as for joining cast irons to mild and stainless steels.
Traits
- Used for welding of cast irons to other cast irons as well as for joining cast irons to mild steels and stainless steels
- A preheat and inter-pass temperature of not less than 350°F (177°C) is required during welding to prevent cracking
- Q2 Lot® - certificates showing actual deposit composition available online
Applications typiques
- Generally more machinable than a Tech-Rod® 55 deposit
- Intended to join and repair pliable cast iron
Positions de soudage
- Polarity DC+
Gaz de protection
- N/A
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.15 | ENi-CI |
DEPOSIT COMPOSITION
| Classification | %Al | %C | %Cu | %Fe | %Mn | %S | %Si | %Ni+Co |
|---|---|---|---|---|---|---|---|---|
| ENi-CI Requirement | 1.0 max. | 2.0 max. | 2.5 max. | 8.0 max. | 2.5 max. | 0.03 max. | 4.0 max. | 85 min. |
| Typical Result | 0.1 | 0.9 | 0.0 | 3.4 | 0.8 | 0.00 | 0.2 | 94 |
TYPICAL OPERATING PROCEDURES
| Diameter |
Current
Amps |
|---|---|
| 3/32" (2.4 mm) | 65-85 |
| 1/8" (3.2 mm) | 80-110 |
| 5/32" (4.0 mm) | 110-140 |