Gösterilen görsel yalnızca temsili amaçlıdır ve gerçek ürünü yansıtmayabilir.
Çaplar / Paketleme
|
Çaplar |
8 lb (3.6 kg) Easy Open Can |
|---|---|
| 3/32 x 12 in (2.4 x 300 mm) | ED033110 |
DETAYLAR
EXCALIBUR® 316/316L-17 provides molybdenum grade for increased corrosion resistance with low carbon levels to help eliminate carbide and produces substantial ferrite content for crack resistance.
Özellikleri
- Substantial ferrite content for crack resistance
- Molybdenum grade for increased corrosion resistance
- Designed with low carbon levels to help eliminate carbide
- Q2 Lot® - Certificate showing actual deposit composition and ferrite number (FN) by ferrite scope available online
Tipik Uygulamalar
- 316 and 316L stainless steel
- ASTM A240 Type 316 and 316L stainless steel
- ASTM A743 or A744 Types CF-8M and CF-3M
- For joining extra low carbon molybdenum bearing austenitic stainless steels
Kaynaklama Konumları
- 3/16 in diameter on Flat and Horizontal only All, except vertical down 5/32 in and smaller diameter
Koruyucu gaz
- N/A
Servis Bilgileri
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Arama sayfası
Test sonucunu görün sorumluluk reddi
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.4 | E316-17, E316L-17 |
| ABS | AWS A5.4 | E316-17, E316L-17 |
| CWB | CSA W48 | E316-17, E316L-17 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|---|
| E316-17 Requirement | 520 (75) min. | 30 min. | |
| E316L-17 Requirement | 480 (70) min. | 30 min. | |
| Typical Result, As-welded | 430-460 (62-66) | 570-590 (82-86) | 38-44 |
DEPOSIT COMPOSITION
| Classification | %Bi | %C | %Cr | %Cu | %Mn | %Mo | %N | %Ni | %P | %S | %Si | Ferrite Number (per AWS A4.2) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| E316-17 Requirement | 0.08 max. | 17.0 - 20.0 | 0.75 max. | 0.5 - 2.5 | 2.0 - 3.0 | 11.0 - 14.0 | 0.04 max. | 0.03 max. | 1.00 max. | |||
| E316L-17 Requirement | 0.04 max. | 17.0 - 20.0 | 0.75 max. | 0.5 - 2.5 | 2.0 - 3.0 | 11.0 - 14.0 | 0.04 max. | 0.03 max. | 1.00 max. | |||
| Typical Result | 0.002-0.003 | 0.01-0.03 | 18.9-20.0 | 0.06-0.26 | 0.8-1.0 | 2.1-2.8 | 0.04-0.07 | 11.6-11.9 | 0.01-0.03 | 0.01 | 0.72-0.90 | 9-14 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 3/32 in (2.4 mm) | DC+ | 40-80 |
| 3/32 in (2.4 mm) | AC | 40-80 |
| 1/8 in (3.2 mm) | DC+ | 75-110 |
| 1/8 in (3.2 mm) | AC | 75-110 |
| 5/32 in (4.0 mm) | DC+ | 95-150 |
| 5/32 in (4.0 mm) | AC | 95-150 |
| 3/16 in (4.8 mm) | DC+ | 130-200 |
| 3/16 in (4.8 mm) | AC | 130-200 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |