Das abgebildete Produkt dient nur zu Illustrationszwecken und kann vom tatsächlichen Produkt abweichen.
Durchmesser / Lieferform
|
Durchmesser |
Can 22,7 kg |
|---|---|
| 4,0 x 350 mm (5/32 x 14 in) | ED031612 |
DETAILS
Designed for vertical down welding of cross-country and in-plant pipe
Eigenschaften
- Root pass welding of up to X80 grade pipe
- Hot, fill and cap pass of up to X65 grade pipe
- Vertical down welding
- Meets NACE MR0175 for sour gas applications
- Test data available for SSC (NACE TM0177) & HIC (NACE TM0284)
- Cellulosic electrode
Typische Anwendungen
- High productivity in vertical down and out-of-position pipe welding
- Deep penetration
- Clean, visible weld puddle
Schweißpositionen
- Alle
Schutzgas
- Not Applicable
Besondere Eigenschaften
- Q2 Lot® - Lot Controlled Chemistry and Mechanical Properties
Service Informationen
Dokumentation
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS-Suchseite
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E7010-G, E7010-P1 |
| ISO | ISO 2560-A | E 46 3 1Ni C 2 1 |
| ABS | AWS A5.5 | E7010-P1 |
| TUV | AWS A5.5 | E7010-P1 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|---|
| E7010-P1 Requirement | 410 (60) min. | 480 (70) min. | 22 min. | 27 (20) min. | ||
| Typical Result, As-welded | 460-540 (67-79) | 560-660 (81-95) | 22-32 | 54-110 (40-81) | 37-103 (27-76) | 81-91 |
DEPOSIT COMPOSITION
| Classification | %B | %C | %Cr | %Mn | %Mo | %Nb | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|---|---|
| E7010-P1 Requirement | 0.20 max. | 0.30 max. | 1.20 max. | 0.50 max. | 1.00 max. | 0.03 max. | 0.03 max. | 0.60 max. | 0.10 max. | ||
| Typical Result | 0.002 | 0.11-0.18 | 0.04 max. | 0.50-0.88 | 0.07-0.20 | 0.010 max. | 0.66-0.97 | 0.01 | 0.01 max. | 0.10-0.40 | 0.01 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 3.2 mm (1/8 in) | DC+ | 65-130 |
| 4.0 mm (5/32 in) | DC+ | 100-165 |
| 5.0 mm (3/16 in) | DC+ | 130-210 |