Menu Close
50 lb Can of Lincoln Electric Stick Electrodes
The image shown is for representation purposes only and may not reflect the actual product.

Diameters / Packaging

Diameters
 Can 22,7 kg
3.2x350 mm ED029511
4.0x350 mm ED029513
4.8x350 mm ED029509

Shield-Arc® HYP+

Stick (SMAW)

CLASSIFICATIONS:
E7010-P1
E7010-G

Low Alloy, Cellulosic, Pipe • AWS E7010-P1 also meets AWS E7010-G

Diameter

Select Diameter

  • 3.2x350 mm
  • 4.0x350 mm
  • 4.8x350 mm

Package

Select Package

  • Can 22,7 kg

DETAILS

Features

  • Light slag for minimal arc interference
  • Deep penetration
  • Clean, visible weld puddle
  • Superior puddle control

Typical Applications

  • Hot, fill and cap pass of up to X65 grade pipe
  • Root pass welding of up to X80 grade pipe

Welding Positions

  • All positions

Shielding Gas

  • Not Applicable

Service Information

Documentation

You May Also Need

50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc® HYP+

ED029511
50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc® HYP+

ED029513
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030826
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030827
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030828
K2394-1-Stick Electrode Holder & Cable Assembly Kit

Stick Electrode Holder and Cable Assembly (Twist Mate™)

K2394-1
K704 Accessory Kit

Accessory set 400A

K704
Heavy Duty Leather Welding Jacket

Heavy Duty Leather Welding Jacket - Large

K2989-L

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E7010-P1
ABS AWS A5.5 E7010-P1
CWB CSA W48 E4910-P1

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E7010-P1 Requirement 410 (60) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 430-490 (62-70) 530-580 (76-85) 22-29 27-96 (20-71)

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E7010-P1 Requirement 0.20 max. 0.30 max. 1.20 max. 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.60 max. 0.10 max.
Typical Result 0.08-0.16 0.01-0.04 0.43-0.53 0.26-0.33 0.01-0.04 0.01 0.01 max. 0.06-0.18 0.005 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
1/8 in (3.2 mm) DC+ 75-130
5/32 in (4.0 mm) DC+ 90-185
3/16 in (4.8 mm) DC+ 140-225