The image shown is for representation purposes only and may not reflect the actual product.

Diámetros / Embalaje

Diámetros mm	(4) 15 lb Plastic Spool	33 lb Spool	33 lb Spool Buy America	500 lb Accu-Trak® Drum
0.045 in (1.1 mm)	ED033756	ED033755	ED037485
0.052 in (1.3 mm)	ED033759	ED033758
1/16 in (1.6 mm)		ED033761		ED033785

UltraCore® HD-C Flux-cored (FCAW-G) Wire

Soldadura con Núcleo de Fundente Protegido con Gas (FCAW-G) | ED037485

CLASIFICACIONES:
E71T-9C-H8
E71T1-C1A2-CS1-H8

Detalles

UltraCore® HD-C is a high deposition, all position E71T1 gas-shielded flux-cored electrode. Designed with a fast-freezing slag to make it easy for the operator to weld at high deposition rates, even when welding out-of-position. Intended for use with 100% CO2 shielding gas. This product is manufactured with steel made and melted in the U.S.A. It complies to Buy America (BA), Buy American (BAA), Build America, Buy America (BABA), and American Iron & Steel (AIS) standards.

Características

This product is manufactured with steel made and melted in the U.S.A. It complies to Buy America (BA), Buy American (BAA), Build America, Buy America (BABA), and American Iron & Steel (AIS) standards.
High Deposition Rates – increase weld deposition up to 10 lbs/hr out-of-position
Flat Bead Appearance – fast freezing slag for a flat bead shape and increased productivity in all positions, including vertical up
Wide Operating Range – operators can set the machine on a single setting and weld in all positions
Little or No Pre-Weld Clean up Required – weld over light rust, mill scale, and primer

Servicio de información

ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS

Ver los resultados de la prueba de limitación de responsabilidad

CONFORMANCE

CONFORMANCES	SPECIFICATION	CLASSIFICATION
AWS	AWS A5.20	E71T-1C-H8, E71T-9C-H8
AWS	AWS A5.36	E71T1-C1A2-CS1-H8
ABS	ABS - Part 2	3YSA H10
CWB	CSA W48	E491T1-C1A2-CS1-H8 (E491T-1-H8), E491T1-C1A3-CS1-H8 (E491T-9-H8)
DNV-GL	DNV - 2.9	II YMS H10, III YMS H10
LR	LR - Chapter 11	3YM H10, 3YS H10

MECHANICAL PROPERTIES

Classification	Shielding Gas	Polarity	Yield Strength @ 0.2% Offset MPa (ksi)	Tensile Strength MPa (ksi)	Elongation %	Charpy V-Notch J (ft-lbs) @ -20°C (0°F)	Charpy V-Notch J (ft-lbs) @ -30°C (-20°F)
E71T-1C-H8 Requirement	100% CO2	DC+	400 (58) min.	480-660 (70-95)	22 min.	27 (20) min.
E71T-9C-H8 Requirement	100% CO2	DC+	400 (58) min.	480-660 (70-95)	22 min.		27 (20) min.
E71T1-C1A2-CS1-H8 Requirement	100% CO2	DC+	400 (58) min.	480-660 (70-95)	22 min.		27 (20) min.
Typical Result, As-welded	100% CO2	DC+	510 (74)	580-640 (84-93)	22	47-84 (35-62)	31-115 (23-85)

DEPOSIT COMPOSITION

Classification	Shielding Gas	Polarity	%B	%C	%Mn	%P	%S	%Si	Diffusible Hydrogen mL/100g Weld Metal
E71T-1C-H8 Requirement	100% CO2	DC+		0.12 max.	1.75 max.	0.03 max.	0.03 max.	0.90 max.	8.0 max.
E71T-9C-H8 Requirement	100% CO2	DC+		0.12 max.	1.75 max.	0.03 max.	0.03 max.	0.90 max.	8.0 max.
E71T1-C1A2-CS1-H8 Requirement	100% CO2	DC+		0.12 max.	1.75 max.	0.030 max.	0.030 max.	0.90 max.	8 max.
Typical Result	100% CO2	DC+	0.0033-0.005	0.03-0.06	1.36-1.60	0.01-0.02	0.005-0.01	0.38-0.45	4.4-7.7

TYPICAL OPERATING PROCEDURES

Diameter	Shielding Gas	Polarity	CTWD mm (in.)⁽¹⁾	Wire Feed Speed m/min (in/min)	Voltage volts	Approx. Current amps	Melt-off Rate kg/hr (lb/hr)	Deposition Rate kg/hr (lb/hr)	Efficiency %
0.045 in (1.1 mm)	100% CO2	DC+	19-25 (3/4-1)	4.4 (175)	22-25	145	1.8 (3.9)	1.5 (3.4)	85-87
0.045 in (1.1 mm)	100% CO2	DC+	19-25 (3/4-1)	6.4 (250)	23-28	185	2.5 (5.6)	2.2 (4.8)	85-87
0.045 in (1.1 mm)	100% CO2	DC+	19-25 (3/4-1)	7.6 (300)	24-30	215	3.1 (6.8)	2.6 (5.8)	85-87
0.045 in (1.1 mm)	100% CO2	DC+	19-25 (3/4-1)	8.9 (350)	25-31	235	3.6 (7.9)	3.1 (6.8)	85-87
0.045 in (1.1 mm)	100% CO2	DC+	19-25 (3/4-1)	10.2 (400)	27-32	255	4.1 (9.0)	3.5 (7.8)	85-87
0.045 in (1.1 mm)	100% CO2	DC+	19-25 (3/4-1)	11.4 (450)	28-33	280	4.6 (10.1)	4.0 (8.8)	85-87
0.045 in (1.1 mm)	100% CO2	DC+	19-25 (3/4-1)	12.7 (500)	27-33	300	5.1 (11.3)	4.4 (9.8)	85-87
0.045 in (1.1 mm)	100% CO2	DC+	19-25 (3/4-1)	14.0 (550)	28-33	315	5.6 (12.4)	4.9 (10.8)	85-87
0.045 in (1.1 mm)	100% CO2	DC+	19-25 (3/4-1)	15.2 (600)	30-35	335	6.1 (13.5)	5.3 (11.7)	85-87
0.052 in (1.3 mm)	100% CO2	DC+	19-25 (3/4-1)	3.8 (150)	22-25	155	2.1 (4.7)	1.7 (3.8)	81-85
0.052 in (1.3 mm)	100% CO2	DC+	19-25 (3/4-1)	5.1 (200)	23-26	190	2.9 (6.3)	2.4 (5.2)	81-85
0.052 in (1.3 mm)	100% CO2	DC+	19-25 (3/4-1)	6.4 (250)	23-27	225	3.5 (7.8)	3.0 (6.5)	81-85
0.052 in (1.3 mm)	100% CO2	DC+	19-25 (3/4-1)	7.6 (300)	24-29	265	4.3 (9.4)	3.6 (7.9)	81-85
0.052 in (1.3 mm)	100% CO2	DC+	19-25 (3/4-1)	8.9 (350)	26-30	285	5.0 (11.0)	4.2 (9.2)	81-85
0.052 in (1.3 mm)	100% CO2	DC+	19-25 (3/4-1)	9.5 (375)	27-30	310	5.3 (11.7)	4.5 (9.9)	81-85
0.052 in (1.3 mm)	100% CO2	DC+	19-25 (3/4-1)	10.8 (425)	28-32	325	6.0 (13.3)	5.1 (11.2)	81-85
0.052 in (1.3 mm)	100% CO2	DC+	19-25 (3/4-1)	12.1 (475)	29-33	345	6.8 (14.9)	5.7 (12.6)	81-85
0.052 in (1.3 mm)	100% CO2	DC+	19-25 (3/4-1)	12.7 (500)	30-34	360	7.1 (15.6)	6.0 (13.3)	81-85
1/16 in (1.6 mm)	100% CO2	DC+	19-25 (3/4-1)	3.8 (150)	21-26	195	2.9 (6.4)	2.4 (5.3)	84-87
1/16 in (1.6 mm)	100% CO2	DC+	19-25 (3/4-1)	4.4 (175)	22-27	245	3.4 (7.5)	2.9 (6.3)	84-87
1/16 in (1.6 mm)	100% CO2	DC+	19-25 (3/4-1)	5.1 (200)	22-27	260	3.9 (8.5)	3.3 (7.2)	84-87
1/16 in (1.6 mm)	100% CO2	DC+	19-25 (3/4-1)	5.7 (225)	23-28	290	4.4 (9.6)	3.7 (8.1)	84-87
1/16 in (1.6 mm)	100% CO2	DC+	19-25 (3/4-1)	6.4 (250)	24-29	310	4.8 (10.6)	4.1 (9.1)	84-87
1/16 in (1.6 mm)	100% CO2	DC+	19-25 (3/4-1)	7.6 (300)	25-30	330	5.8 (12.7)	4.9 (10.9)	84-87
1/16 in (1.6 mm)	100% CO2	DC+	19-25 (3/4-1)	8.3 (325)	25-30	365	6.3 (13.8)	5.4 (11.9)	84-87
1/16 in (1.6 mm)	100% CO2	DC+	19-25 (3/4-1)	8.9 (350)	26-30	390	6.7 (14.8)	5.8 (12.8)	84-87
1/16 in (1.6 mm)	100% CO2	DC+	19-25 (3/4-1)	10.2 (400)	27-31	405	7.7 (16.9)	6.7 (14.7)	84-87

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.