DETALLES
Ideal para la reconstrucción de aceros al carbono y de baja aleación. Utilizar como base para piezas de acero al carbono antes del recargue. Gran resistencia a la compresión bajo cargas pesadas. Los depósitos no suelen presentar grietas, son mecanizables y pueden cortarse con llama. El espesor del depósito es ilimitado.
Características
- Depósito de relleno en acero al carbono y metales base de baja aleación
- Capas ilimitadas
- Build-up deposit on carbon steel and low alloy steel base metals
- Unlimited layers with proper preheat and interpass temperatures and procedures
- Unlimited layers with proper preheat and interpass temperatures and procedures
Información de mantenimiento
Documentación
También puede necesitar
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Página de búsqueda de HDS
MECHANICAL PROPERTIES
| Classification | Number of layer | Hardness Rockwell C |
|---|---|---|
| Typical Result | 1 Layer | 14-30 |
| Typical Result | 2 Layers | 26-32 |
| Typical Result | 3 Layers | 25-34 |
| Typical Result, Work-hardened | 1 Layer | 28-34 |
| Typical Result, Work-hardened | 2 Layers | 32-36 |
| Typical Result, Work-hardened | 3 Layers | 35-38 |
| Typical Result, Flame-hardened | 2 Layers | 38-42 |
DEPOSIT COMPOSITION
| Classification | Product Size | %Al | %C | %Cr | %Mn | %P | %S | %Si |
|---|---|---|---|---|---|---|---|---|
| Typical Result | .045" (1.1 mm) | 1.6-1.9 | 0.11-0.18 | 1.2-1.4 | 1.8-2.1 | 0.004-0.012 | 0.002-0.005 | 0.50-0.75 |
| Typical Result | 1/16" (1.6 mm) | 1.6-1.9 | 0.11-0.18 | 1.2-1.4 | 1.8-2.1 | 0.004-0.012 | 0.002-0.005 | 0.50-0.75 |
| Typical Result | 5/64" (2.0 mm) | 1.4-1.7 | 0.13-0.15 | 1.1-1.4 | 2.1-2.3 | 0.004-0.008 | 0.002-0.005 | 0.45-0.60 |
| Typical Result | 7/64" (2.8 mm) | 1.4-1.7 | 0.13-0.15 | 1.1-1.4 | 2.1-2.3 | 0.004-0.008 | 0.002-0.005 | 0.45-0.60 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
ESO
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Deposition Rate
kg/hr (lb/hr) |
|---|---|---|---|---|---|---|
| 0.045 in (1.1 mm) | DC+ | 45 (1 3/4) | 5.1 (200) | 25 | 80 | 1.5 (3.3) |
| 0.045 in (1.1 mm) | DC+ | 45 (1 3/4) | 8.9 (350) | 28 | 130 | 2.7 (6.0) |
| 0.045 in (1.1 mm) | DC+ | 45 (1 3/4) | 12.7 (500) | 31 | 150 | 3.9 (8.7) |
| 1/16 in (1.6 mm) | DC+ | 45 (1 3/4) | 3.8 (150) | 26 | 125 | 2.1 (4.6) |
| 1/16 in (1.6 mm) | DC+ | 45 (1 3/4) | 6.4 (250) | 29 | 180 | 3.5 (7.8) |
| 1/16 in (1.6 mm) | DC+ | 45 (1 3/4) | 8.9 (350) | 32 | 225 | 5.0 (11.1) |
| 5/64 in (2.0 mm) | DC+ | 50 (2) | 3.2 (125) | 23 | 200 | 3.1 (6.9) |
| 5/64 in (2.0 mm) | DC+ | 50 (2) | 5.1 (200) | 27 | 290 | 4.9 (10.8) |
| 5/64 in (2.0 mm) | DC+ | 50 (2) | 6.4 (250) | 29 | 325 | 6.1 (21.1) |
| 7/64 in (2.8 mm) | DC+ | 64 (2 1/2) | 3.4 (135) | 26 | 360 | 5.7 (12.6) |
| 7/64 in (2.8 mm) | DC+ | 64 (2 1/2) | 4.4 (175) | 28 | 420 | 7.3 (16.0) |
| 7/64 in (2.8 mm) | DC+ | 64 (2 1/2) | 6.0 (235) | 30 | 470 | 9.6 (21.1) |