DLF-84 Single Boom Wire Drive
DLF-84 Single Boom Wire Drive
The image shown is for representation purposes only and may not reflect the actual product.

DLF-84 Single Wire Drive Boom Mount Feeder - No U/I

K5703-1

DLF-84 wire drive for use with Flex Feed 84 control box for boom mounted configurations

Entrada

Entrada

Detalles

The DLF-84 boom feeder is the ideal feeder to pair with Flextec power sources for *Pulsed MIG, as well as, CV-MIG welding applications. Designed to combine the latest welding innovation with easy, operator-focused control features, this wire feeder/power source solution delivers the benchmark of simplicity and performance. Pair with a compatible Lincoln Electric push-pull gun for superior aluminum performance.

Características

  • Simple System Configuration – Includes integrated 5-pin ArcLink control cable and .035/.045 drive rolls.
  • Simple to Use – For synergic setup, choose desired weld process, wire type, wire diameter and gas type.
  • Synergic weld modes – one knob control. Set higher wire feed speeds for thicker materials and lower wire feed speeds for thinner materials. Voltage is automatically adjusted. (requires synergic compatible Flextec)
  • Pulsed MIG Support – with pulse supporting Flextec power source – lower spatter, greater puddle control. (requires pulse compatible Flextec)
  • Auto Settings – run-in speed, pre-flow, post-flow, burn-back are auto-set based on setup configuration. (requires auto-settings compatible Flextec)
  • Memories – up to four stored weld schedules for easy changes between different welds. Easily configurable from 1-4 memories.
  • Limits/Lockouts – reduces chance of accidental welding out of procedure.
  • Customizable Start and Crater Settings – greater control over weld profile at start and end of weld.
  • Push-pull capable with 12-pin connection kit.

Servicio de información

Qué está incluido

  • (1) Integrated ArcLink Control Cable 8 ft.

Especificaciones

Pesos y dimensiones del producto

Altura del producto (pulgadas) 22.5
Altura del producto (mm) 572
Ancho del producto (pulgadas) 20
Ancho del producto (mm) 508
Longitud del producto (pulgadas) 15.5
Longitud del producto (mm) 394
Peso del producto (libras) 24
Peso del producto (kg) 11

Alimentadores de Alambre

Número de rodillos impulsados 4 rolls
Tipo de alimentador Boom
Configuración Single
Tecnología de la comunicación ArcLink
Capacidad de salida nominal máxima 600A
Diámetro máximo del cable (sólido) 1/8 in (3.2 mm)
Diámetro máximo del cable (con núcleo) 3/64 in (1.2 mm)
WFS máx. 1200IPM
Configuración de cables Single
Tamaño máximo del carrete (lbs) 60
Tamaño máximo del carrete (kg) 30
Amperaje de alimentación de alambre 600
Ciclo de trabajo de alimentación de alambre 0.6

Especificación básica

Potencia de entrada 40 VDC
Rango de salida 600 A @ 60%

Aplicaciones

Aplicación Típica Fabricación General
Equipamiento Pesado
Fabricación Pesada

Garantía

Garantía 3 Years