Menu Close
00022856.jpg
L'image affichée est à des fins de représentation uniquement et peut ne pas refléter le produit réel.

Diameters / Packaging

Diameters
 (4) 8 lb Cartons
 10CPL (40CT)
1/8 x 14 in (3.2 x 350 mm) ED038098
3/16 x 14 in (4.8 x 350 mm) ED038100
3/32 x 12 in (2.4 x 300 mm) ED038097
5/32 x 14 in (4.0 x 350 mm) ED038099

Fleetweld® 47

Stick (SMAW) | ED038098

AWS:
E7014

Mild Steel, Rutile • AWS E7014

Diamètre

Sélectionnez le diamètre

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (4.8 x 350 mm)
  • 3/32 x 12 in (2.4 x 300 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Paquet

Sélectionnez un forfait

  • 10CPL (40CT)
Acheter maintenant

Détails

Specifically designed for vertical down welding of sheet metal and ornamental iron

Traits

  • Good restrike characteristics
  • Smooth and transfer and good wetting and low penetration
  • Operates on low amperages
  • High deposition rates
  • Excellent operator appeal

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E7014
ABS AWS A5.1 E7014
BV BV - Chapter 5 1
CWB CSA W48 E4914
DNV-GL DNV - 2.9 1
LR LR - Chapter 11 1M

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E7014 Requirement 400 (58) min. 480 (70) min. 17 min.
Typical Result, As-welded 410-470 (60-69) 490-540 (71-78) 18-29 27-83 (20-61)

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Mn+Ni+Cr+Mo+V
E7014 Requirement 0.15 max. 0.20 max. 1.25 max. 0.30 max. 0.30 max. 0.035 max. 0.035 max. 0.90 max. 0.08 max. 1.50 max.
Typical Result 0.05-0.08 0.02-0.04 0.44-0.67 0.01 max. 0.01-0.04 0.010-0.018 0.007-0.012 0.16-0.47 0.01-0.02 0.49-0.74

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) AC 80-100
3/32 in (2.4 mm) DC± 75-95
1/8 in (3.2 mm) AC 110-155
1/8 in (3.2 mm) DC± 100-145
5/32 in (4.0 mm) AC 150-225
5/32 in (4.0 mm) DC± 135-200
3/16 in (4.8 mm) AC 200-285
3/16 in (4.8 mm) DC± 185-235

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.