Menu Close
Fleetweld 5P+ 14 Stick Electrode in 10 lb can"
L'image affichée est à des fins de représentation uniquement et peut ne pas refléter le produit réel.

Diameters / Packaging

Diameters
 (3) 10 lb Easy Open Can
 50 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED032565 ED010278
3/16 x 14 in (4.8 x 350 mm) ED010281
3/32 x 12 in (2.4 x 300 mm) ED032564 ED010283
5/32 x 14 in (4.0 x 350 mm) ED032566 ED010285

Fleetweld® 5P+

Stick (SMAW) | ED032566

AWS:
E6010

Mild Steel, Cellulosic • AWS E6010

Diamètre

Sélectionnez le diamètre

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (4.8 x 350 mm)
  • 3/32 x 12 in (2.4 x 300 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Paquet

Sélectionnez un forfait

  • (3) 10 lb Easy Open Can
  • 50 lb Easy Open Can
Acheter maintenant

Détails

Mild steel stick electrode standard in the pipe welding industry for root pass

Traits

  • High operator appeal and control
  • Easy slag removal
  • Cross country and in-plant pipe welding

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P+

ED010278
50 lb Can of Lincoln Electric Stick Electrodes

FLEETWELD® 5P+®

ED010281
50 lb Can of Lincoln Electric Stick Electrodes

FLEETWELD® 5P+®

ED010283
50 lb Can of Lincoln Electric Stick Electrodes

FLEETWELD® 5P+®

ED010285
Fleetweld 5P+ 14 Stick Electrode in 10 lb can"

Fleetweld® 5P+

ED032564
K2394-1-Stick Electrode Holder & Cable Assembly Kit

Stick Electrode Holder and Cable Assembly (Twist Mate™)

K2394-1
K875 Accessory Kit

Accessory Kit - 150 Amp

K875
Heavy Duty Leather Welding Jacket

Heavy Duty Leather Welding Jacket - Large

K2989-L

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E6010
ISO ISO 2560-A E 42 3 C 2 5
ABS AWS A5.1 E6010
CWB CSA W48 E4310
DNV-GL DNV - 2.9 3

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Hardness Rockwell B
E6010 Requirement 330 (48) min. 410 (60) min. 22 min. 27 (20) min.
Typical Result, As-welded 430-480 (62-69) 530-580 (76-85) 23-31 51-122 (38-90) 82-91

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E6010 Requirement 0.20 max. 0.20 max. 1.20 max. 0.30 max. 0.30 max. 1.00 max. 0.08 max.
Typical Result 0.12-0.16 0.06 max. 0.50-0.67 0.02 0.07 max. 0.007-0.012 0.004-0.011 0.14-0.25 0.01

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 50-85
3/32 in (2.4 mm) DC- 50-85
1/8 in (3.2 mm) DC+ 75-135
1/8 in (3.2 mm) DC- 75-135
5/32 in (4.0 mm) DC+ 100-175
5/32 in (4.0 mm) DC- 100-175
3/16 in (4.8 mm) DC+ 140-225
3/16 in (4.8 mm) DC- –

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.