Détails
Fleetweld 5P is a mild steel, cellulosic stick electrode that is designed for deep arc penetration, light slag with minimal arc interference, and excellent vertical and overhead capability. All RSP products carry AWS compliance. Unlike the standard products, RSP products have no other agencies approvals.
Traits
- Excellent vertical and overhead capability
- Light slag with minimal arc interference
- Deep arc penetration
- Retail Small Packaging (RSP). All RSP products carry AWS compliance. Unlike standard products, RSP products have no other agencies approvals.
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.1 | E6010 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
|---|---|---|---|---|
| E6010 Requirement | 330 (48) min. | 410 (60) min. | 22 min. | 27 (20) min. |
| Typical Result, As-welded | 450-490 (66-71) | 540-600 (79-88) | 22-28 | 43-53 (32-39) |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|
| E6010 Requirement | 0.20 max. | 0.20 max. | 1.20 max. | 0.30 max. | 0.30 max. | 1.00 max. | 0.08 max. | ||
| Typical Result | 0.11-0.16 | 0.02-0.05 | 0.44-0.52 | 0.01 max. | 0.04-0.05 | 0.007-0.009 | 0.007 | 0.29-0.33 | 0.01 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 3/32" (2.4 mm) | DC+ | 40-80 |
| 3/32" (2.4 mm) | DC- | 50-85 |
| 1/8" (3.2 mm) | DC+ | 70-130 |
| 1/8" (3.2 mm) | DC- | 75-135 |
| 5/32" (4.0 mm) | DC+ | 90-165 |
| 5/32" (4.0 mm) | DC- | 100-175 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |