Menu Close
Stick Electrode 50 lb. Box
L'image affichée est à des fins de représentation uniquement et peut ne pas refléter le produit réel.

Diameters / Packaging

Diameters
 50 lb Carton
1/4 x 18 in (6.4 x 450 mm) ED010360
1/8 x 14 in (3.2 x 350 mm) ED010362
3/16 x 18 in (4.8 x 450 mm) ED010366
5/32 x 14 in (4.0 x 350 mm) ED010372
7/32 x 18 in (5.6 x 450 mm) ED010375

Jetweld® 1 Stick (SMAW) Electrode

Stick (SMAW) | ED010375

AWS:
E7024-1

Mild Steel, High Deposition • AWS E7024-1

Diamètre

Sélectionnez le diamètre

  • 1/4 x 18 in (6.4 x 450 mm)
  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 18 in (4.8 x 450 mm)
  • 5/32 x 14 in (4.0 x 350 mm)
  • 7/32 x 18 in (5.6 x 450 mm)

Paquet

Sélectionnez un forfait

  • 50 lb Carton
Acheter maintenant

Détails

Jetweld 1 is a mild steel, high deposition stick electrode for large welds in flat or slightly downhill (15° max) positions.

Traits

  • High deposition rates
  • Smooth bead appearance
  • Minimal spatter
  • Shallow penetration

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

Stick Electrode 50 lb. Box

JETWELD® 1

ED010360
Stick Electrode 50 lb. Box

Jetweld® 1 Stick (SMAW) Electrode

ED010362
Stick Electrode 50 lb. Box

JETWELD® 1

ED010366
Stick Electrode 50 lb. Box

Jetweld® 1 Stick (SMAW) Electrode

ED010372
K2394-1-Stick Electrode Holder & Cable Assembly Kit

Stick Electrode Holder and Cable Assembly (Twist Mate™)

K2394-1
K704 Accessory Kit

Accessory set 400A

K704
Heavy Duty Leather Welding Jacket

Heavy Duty Leather Welding Jacket - Large

K2989-L

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E7024-1
ISO ISO 2560-B E4924-1 A
ABS AWS A5.1 E7024-1
BV BV - Chapter 5 1
CWB CSA W48 E4924-1
DNV-GL DNV - 2.9 1
LR LR - Chapter 11 1M

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -20°C (0°F) 		Hardness Rockwell B
E7024-1 Requirement 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 450-530 (65-76) 520-610 (76-88) 22-30 27-80 (20-59) 82-93

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Mn+Ni+Cr+Mo+V
E7024-1 Requirement 0.15 max. 0.20 max. 1.25 max. 0.30 max. 0.30 max. 0.035 max. 0.035 max. 0.90 max. 0.08 max. 1.50 max.
Typical Result 0.05-0.11 0.03-0.06 0.67-1.13 0.02 max. 0.01-0.05 0.012-0.022 0.004-0.011 0.25-0.54 0.02-0.03 0.79-1.25

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
1/8 in (3.2 mm) AC 115-175
1/8 in (3.2 mm) DC± 100-160
5/32 in (4.0 mm) AC 180-240
5/32 in (4.0 mm) DC± 160-215
3/16 in (4.8 mm) AC 240-300
3/16 in (4.8 mm) DC± 220-280
7/32 in (5.6 mm) AC 300-380
7/32 in (5.6 mm) DC± 270-340
1/4 in (6.4 mm) AC 340-440
1/4 in (6.4 mm) DC± 320-400

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.