Menu Close
33 lb Steel Spool Outershield MC-409 Flux-Cored Wire
L'image affichée est à des fins de représentation uniquement et peut ne pas refléter le produit réel.

Diameters / Packaging

Diameters
 33 lb Spool
 50 lb Spool
 750 lb Accu-Trak® Drum
0.045 in (1.1 mm) ED037105 ED037416 ED037281
0.052 in (1.3 mm) ED037106 ED037417 ED037282
1/16 in (1.6 mm) ED037107 ED037418 ED037283

Metalshield® MC-70 XLS™

Metal-Cored Gas-Shielded (GMAW-C) | ED037106

AWS:
E70C-6M-H4

Metalshield® MC-80 XLS™ de Lincoln Electric est un fil fourré en métal faiblement allié conçu avec un minimum d'îlots de silicium pour une surface de soudure exceptionnellement net et un nettoyage après soudage réduit au minimum.

Diamètre

Sélectionnez le diamètre

  • 0.045 in (1.1 mm)
  • 0.052 in (1.3 mm)
  • 1/16 in (1.6 mm)

Paquet

Sélectionnez un forfait

  • 33 lb Spool
  • 50 lb Spool
  • 750 lb Accu-Trak® Drum
Acheter maintenant

Détails

Metalshield® MC-70 XLS™ de Lincoln Electric est un fil fourré en métal faiblement allié conçu avec un minimum d'îlots de silicium pour une surface de soudure exceptionnellement net et un nettoyage après soudage réduit au minimum.

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Documentation (en anglais seulement)

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.18 E70C-6M-H4
CWB/CSA CWB/CSA E491T15-M21A4-CS1-H4 & E491T15-M20A4-CS1-H4 (E491C-6MJ-H4)
CSA CSA W48 E491T15-GA4-CS1-H4 (E491C-6MJ-H4)
AWS AWS D1.8 0.045 in., 0.052 in. & 1/16 in.

MECHANICAL PROPERTIES

Classification Shielding Gas Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E70C-6M-H4 Requirement 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
E70T15-M20A4-CS1-H4 Requirement 400 (58) min. 490-660 (70-95) 22 min. 27 (20) min.
Typical Result, As-welded 75% Ar, 25% CO2 450-510 (65-75) 510-590 (75-85) 26-30 40-75 (30-55)
Typical Result, As-welded 90% Ar, 10% CO2 450-550 (65-80) 550-620 (80-90) 26-30 60-105 (45-75)

DEPOSIT COMPOSITION

Classification Shielding Gas %C %Cr %Mn %Mo %Ni %P %S %Si %Cu %V Diffusible Hydrogen
mL/100g Weld Metal
E70C-6M-H4 Requirement 0.12 max. 0.20 max. 1.75 max. 0.30 max. 0.50 max. 0.03 max. 0.03 max. 0.90 max. 0.50 max. 0.08 max. 4.0 max.
E70T15-M20A4-S1-H4 0.12 max. 0.20 max. 1.75 max. 0.30 max. 0.50 max. 0.030 max. 0.030 max. 0.90 max. 0.50 max. 0.08 max. 4 max.
Typical Result 75% Ar, 25% CO2 0.04-0.07 0.01-0.03 1.25-1.55 0.01-0.02 0.30-0.40 0.005-0.010 0.010-0.020 0.55-0.80 0.01-0.05 0.01-0.02 2-4
Typical Result 90% Ar, 10% CO2 0.04-0.07 0.01-0.03 1.25-1.60 0.01-0.02 0.30-0.40 0.005-0.010 0.01-0.02 0.60-0.85 0.01-0.05 0.01-0.02 2-4

TYPICAL OPERATING PROCEDURES

Diameter in (mm) Polarity Shielding Gas CTWD(1) mm (in) Wire Feed Speed m/min (in/min) Voltage (volts) Current (amps) Melt-Off Rate kg/hr (lb/hr) Deposition Rate kg/hr (lb/hr) Efficiency (%)
0.045 (1.1) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 5.1 (200) 21-23 155 2.3 (5.0) 2.1 (4.6) 92
0.045 (1.1) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 6.4 (250) 22-24 185 2.8 (6.2) 2.6 (5.8) 94
0.045 (1.1) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 7.6 (300) 22-26 220 3.5 (7.7) 3.2 (7.0) 91
0.045 (1.1) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 8.9 (350) 22-27 245 4.0 (8.9) 3.7 (8.2) 93
0.045 (1.1) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 10.2 (400) 23-27 260 4.6 (10.1) 4.3 (9.4) 93
0.045 (1.1) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 11.4 (450) 23-28 280 5.2 (11.4) 4.9 (10.7) 94
0.045 (1.1) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 12.7 (500) 23-29 305 5.7 (12.6) 5.5 (12.2) 97
0.045 (1.1) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 14.0 (550) 24-29 315 6.3 (13.9) 6.2 (13.6) 98
0.045 (1.1) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 15.2 (600) 25-30 325 6.8 (15.1) 6.7 (14.8) 98
0.045 (1.1) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 16.5 (650) 26-30 355 7.5 (16.5) 7.4 (16.3) 98
0.045 (1.1) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 17.8 (700) 26-30 360 8.0 (17.7) 7.9 (17.5) 99
0.052 (1.3) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 5.1 (200) 22-24 210 3.1 (6.8) 2.9 (6.3) 94
0.052 (1.3) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 6.4 (250) 22-26 260 3.9 (8.5) 3.5 (7.8) 92
0.052 (1.3) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 7.6 (300) 22-27 290 4.6 (10.2) 4.3 (9.5) 94
0.052 (1.3) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 8.9 (350) 23-28 315 5.4 (11.9) 5.2 (11.4) 97
0.052 (1.3) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 10.2 (400) 24-28 350 6.2 (13.6) 6.1 (13.4) 97
0.052 (1.3) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 11.4 (450) 25-28 370 6.9 (15.3) 6.8 (15.1) 99
0.052 (1.3) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 12.7 (500) 27-29 390 7.7 (17.0) 7.6 (16.8) 99
0.052 (1.3) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 14.0 (550) 27-30 420 8.4 (18.6) 8.3 (18.3) 99
1/16 (1.6) DC+ 90% Ar, 10% CO2 25-32 (1-1 1/4) 3.8 (150) 22-24 230 3.2 (7.0) 2.8 (6.3) 89
1/16 (1.6) DC+ 90% Ar, 10% CO2 25-32 (1-1 1/4) 5.1 (200) 22-25 280 4.3 (9.4) 3.9 (8.7) 93
1/16 (1.6) DC+ 90% Ar, 10% CO2 25-32 (1-1 1/4) 6.4 (250) 23-27 310 5.3 (11.6) 5.0 (11.0) 94
1/16 (1.6) DC+ 90% Ar, 10% CO2 25-32 (1-1 1/4) 7.6 (300) 24-28 370 6.3 (13.9) 6.3 (13.8) 99
1/16 (1.6) DC+ 90% Ar, 10% CO2 25-32 (1-1 1/4) 8.9 (350) 26-30 400 7.4 (16.3) 7.2 (15.9) 98
1/16 (1.6) DC+ 90% Ar, 10% CO2 25-32 (1-1 1/4) 10.2 (400) 26-30 450 8.3 (18.4) 8.3 (18.4) 99
1/16 (1.6) DC+ 90% Ar, 10% CO2 25-32 (1-1 1/4) 11.4 (450) 27-31 480 9.5 (21.0) 9.3 (20.6) 98

NOTES

Name
⁽¹⁾ To estimate ESO, subtract 3/16 in (4.8 mm) from CTWD.