Menu Close
Lincoln Electric Stick Electrodes
L'image affichée est à des fins de représentation uniquement et peut ne pas refléter le produit réel.

Diameters / Packaging

Diameters
 (3) 10 lb Easy Open Can
 50 lb Easy Open Can
3.2 x 350 mm (1/8 x 14 in) ED032615
3.2 x 355 mm (1/8 x 14 in) ED030826
4.0 x 350 mm (5/32 x 14 in) ED032616
4.0 x 355 mm (5/32 x 14 in) ED030827
5.0 x 350 mm (3/16 x 14 in) ED032617
5.0 x 355 mm (3/16 x 14 in) ED030828

Pipeliner® 8P+ Stick Electrode (SMAW)

Stick (SMAW) | ED032616

AWS:
E8010-G
E8010-P1

Low Alloy, Cellulosic, Pipe • AWS E8010-P1

Diamètre

Sélectionnez le diamètre

  • 3.2 x 350 mm (1/8 x 14 in)
  • 3.2 x 355 mm (1/8 x 14 in)
  • 4.0 x 350 mm (5/32 x 14 in)
  • 4.0 x 355 mm (5/32 x 14 in)
  • 5.0 x 350 mm (3/16 x 14 in)
  • 5.0 x 355 mm (3/16 x 14 in)

Paquet

Sélectionnez un forfait

  • (3) 10 lb Easy Open Can
Acheter maintenant

Détails

Designed for vertical down welding of cross-country and in-plant pipe

Traits

  • Q2 Lot® - Lot Controlled Chemistry and Mechanical Properties
  • High productivity in vertical down and out-of-position pipe welding
  • Deep penetration
  • Superior puddle control.
  • Clean, visible weld puddle
  • Meets NACE MR0175 for sour gas applications
  • Test data available for SSC (NACE TM0177) & HIC (NACE TM0284)

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E8010-G, E8010-P1
ABS AWS A5.5 E8010-P1
TUV AWS A5.5 E8010-P1
CWB CSA W48 E5510-P1

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F) 		Hardness Rockwell B
E8010-P1 Requirement 460 (67) min. 550 (80) min. 19 min. 27 (20) min.
Typical Result, As-welded 460-560 (67-81) 560-680 (82-98) 19-30 51-114 (38-84) 56-88 (41-65) 33-96 (25-71) 88-92

DEPOSIT COMPOSITION

Classification %B %C %Cr %Mn %Mo %Ni %P %S %Si %V
E8010-P1 Requirement 0.20 max. 0.30 max. 1.20 max. 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.60 max. 0.10 max.
Typical Result 0.002 max. 0.11-0.20 0.01-0.05 0.55-0.91 0.09-0.21 0.60-1.00 0.01 max. 0.01 max. 0.09-0.36 0.02 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
3.2 mm (1/8 in) DC+ 65-120
4.0 mm (5/32 in) DC+ 100-165
5.0 mm (3/16 in) DC+ 130-210