L'image affichée est à des fins de représentation uniquement et peut ne pas refléter le produit réel.
Détails
Designed for vertical down welding of cross-country and in-plant pipe.
Traits
- Q2 Lot® Control and Tested – Lot Certificate available online.
- Excellent impact properties without the intentional addition of Boron
- Clean, visible weld puddle
- Superior puddle control
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E8010-G, E8010-P1 |
| CWB | CSA W48 | E5510-P1 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|---|
| E8010-P1 Requirement | 460 (67) min. | 550 (80) min. | 19 min. | 27 (20) min. | ||
| Typical Result, As-welded | 460-540 (67-78) | 550-650 (80-94) | 19-29 | 51-114 (38-84) | 34-93 (25-69) | 86-98 |
DEPOSIT COMPOSITION
| Classification | %B | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|---|
| E8010-P1 Requirement | 0.20 max. | 0.30 max. | 1.20 max. | 0.50 max. | 1.00 max. | 0.03 max. | 0.03 max. | 0.60 max. | 0.10 max. | |
| Typical Result | 0.0002 max. | 0.12-0.20 | 0.01-0.05 | 0.59-0.97 | 0.09-0.20 | 0.60-1.00 | 0.01 max. | 0.01 | 0.09-0.23 | 0.01 |
TYPICAL OPERATING PROCEDURES
| Classification⁽²⁾ | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 4.0 mm (5/32 in) | DC+ | 100-165 |
| 3/16 in | DC+ | 125-205 |
| 5.0 mm | DC+ | 130-210 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |
| ⁽²⁾ Size 3/16 in. is manufactured to US standard units |