Menu Close
SuperGlaze Aluminum Gem-Pak
Superglaze Gem-Pak
Superglaze Gem-Pak
Superglaze Gem-Pak
Superglaze Gem-Pak
L'image affichée est à des fins de représentation uniquement et peut ne pas refléter le produit réel.

Diameters / Packaging

Diameters
 (20) 1 lb Spool
 7 KG SPOOL (BS300)
 7.26 KG SPOOL (S300)
 16 lb Spool
 20 lb Spool
 300 lb Gem-Pak® Box
0.030 in (0.8 mm) ED030307
0.035 in (0.9 mm) ED030308 ED028395 ED036609
0.072 in (1.8mm) ED038326
1.0 mm ED701753
1.2 mm ED701754 ED702748
1/16 in (1.6 mm) ED030281 ED036611
3/64 in (1.2 mm) ED030310 ED029234 ED036610

SuperGlaze® 4043

MIG (GMAW) | ED038326

AWS:
AWS A5.10 : ER4043

SuperGlaze® 4043 is commonly used to weld on 6XXX base materials and other heat treatable alloys. Compatible with the AluMAX™ process.

Diamètre

Sélectionnez le diamètre

  • 0.030 in (0.8 mm)
  • 0.035 in (0.9 mm)
  • 0.072 in (1.8mm)
  • 1/16 in (1.6 mm)
  • 1.0 mm
  • 1.2 mm
  • 3/64 in (1.2 mm)

Paquet

Sélectionnez un forfait

  • 300 lb Gem-Pak® Box
Acheter maintenant

Détails

SuperGlaze® 4043 Aluminum Silicon alloy is very commonly used to weld on 6XXX base materials and other heat treatable alloys. SuperGlaze® 4043 is a soft alloy, with good crack resistance and high penetration compared to other filler metals. It can be used for certain brazing applications and to weld on high silicon casts like A356. Welding of 5XXX base materials with 4043 and other 4XXX filler metals should be avoided.

AluMAX™ Compatible:

0.072 in. (1.8 mm) Gem-Pak® compatible with the AluMAX™ process for higher deposition and faster travel speeds.

SuperGlaze® Gem-Pak®: TANGLE-FREE FEEDING. GUARANTEED.

The SuperGlaze® Gem-Pak® is 300 lbs. of premium aluminum weld wire under a layer of glass payoff gems. The patented design provides tangle-free feeding. Guaranteed.

Use Accu-Pak® Box Payoff Kit (K2175-2) for payoff

Traits

  • Designed for welding heat-treatable base alloys and more specifically the 6XXX series alloys
  • Lower melting point and more fluidity than the 5XXX series filler alloys
  • Low sensitivity to weld cracking with the 6XXX series base alloys
  • Gem-Pak®: layer of included glass gems guarantee tangle-free feeding
  • Gem-Pak®: simple patented design reduces rework and improves productivity
  • Gem-Pak®: fork-lift ready mini-pallet attached to the box - 100% recyclable
  • Designed for the AluMAX process
  • 300 lb Gem-Pak® Box, Glass Gems

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Documentation (en anglais seulement)

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.10 ER4043

WIRE COMPOSITION

Classification %Be %Mg %Zn %Cu %Fe %Mn %Si %Ti
ER4043 Requirement 0.0003 max. 0.05 max. 0.10 max. 0.30 max. 0.8 max. 0.05 max. 4.5 - 6.0 0.20 max.
Typical Result 0.0000 0.01 0.00 0.03 0.1 0.00 5.1 0.02

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Gas Flow
L/min (CFH) 		Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps
0.9 mm (.035") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 14.9 (585) 23.3 170
1.2 mm (3/64") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 8.9 (350) 25.2 195
1.6 mm (1/16") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 6.4 (250) 24.0 240