Menu Close
LINCOLN ER70S-2 Cut Length TIG Electrode
L'image affichée est à des fins de représentation uniquement et peut ne pas refléter le produit réel.

Diameters / Packaging

Diameters
 10 lb Carton
1/8 in (3.2 mm) ED037190
3/32 in (2.4 mm) ED037191

SuperGlaze® 5554 TIG

TIG (GTAW) | ED037190

AWS:
AWS A5.10 : R5554

SuperGlaze® 5554 is used for elevated temperature 150F / 65C service and as 5454 base material match

Diamètre

Sélectionnez le diamètre

  • 1/8 in (3.2 mm)
  • 3/32 in (2.4 mm)

Paquet

Sélectionnez un forfait

  • 10 lb Carton
Acheter maintenant

Détails

Non heat treatable Low Magnesium Manganese alloy used for 5454 base material especially in elevated temperature applications above 150 deg F / 65 deg C .

Traits

  • Matching filler alloy for welding 5454 base alloys
  • Low magnesium content to closely match the base material chemistry
  • Alloy embossed on each rod for easy identification

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.10 ER5554

WIRE COMPOSITION

Classification %Be %Cr %Cu %Fe %Mg %Mn %Si %Ti %Zn
ER5554 Requirement 0.0003 max. 0.05 - 0.20 0.10 max. 0.40 max. 2.4 - 3.0 0.50 - 1.0 0.25 max. 0.05 - 0.20 0.25 max.
Typical Result 0.0002 max. 0.08 0.01 0.13 2.6 0.7 0.06 0.09 0.00