Menu Close
UltraCore, 50 LB coil
L'image affichée est à des fins de représentation uniquement et peut ne pas refléter le produit réel.

Diameters / Packaging

Diameters
 50 lb Coil Buy America
1/16 in (1.6 mm) ED032974
3/32 in (2.4 mm) ED032940
5/64 in (2.0 mm) ED032975

UltraCore® 75C

Flux-Cored Gas-Shielded (FCAW-G) | ED032940

AWS:
E70T-5C-JH4
E70T5-C1A4-CS1-H4

L'UltraCore® 75C de Lincoln Electric est capable de produire de faibles niveaux d'hydrogène diffusible et des taux de dépôt élevés.

Diamètre

Sélectionnez le diamètre

  • 1/16 in (1.6 mm)
  • 3/32 in (2.4 mm)
  • 5/64 in (2.0 mm)

Paquet

Sélectionnez un forfait

  • 50 lb Coil Buy America
Acheter maintenant

Détails

Capable de produire de faibles niveaux d'hydrogène diffusible et des taux de dépôt élevés. Il est recommandé pour le soudage mono ou multi-passes dans les applications semi-automatiques ou automatiques.

Traits

  • Dépôt élevé dans les positions plates et horizontales
  • Niveaux d'hydrogène diffusible H4
  • Conçu pour le soudage avec un gaz de protection de 100 % CO2
  • Performances de l'arc et aspect du cordon de qualité supérieure
  • Conditionnement en sachet en aluminium ProTech®
  • This product is manufactured with steel made and melted in the U.S.A. It complies to Buy America (BA), Buy American (BAA), Build America, Buy America (BABA), and American Iron & Steel (AIS) standards.

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

Submerged Arc Wire

Lincolnweld® L-50® Submerged Arc (SAW) Wire

ED011328
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Innershield® NR®-5 Flux-Cored (FCAW-S) Wire

ED012699
Innershield Flux Cored wire, 25 or 30 lb steel spool

Innershield® NR®-212

ED030646
Excalibur 7018 MR 14 stick electrode"

Excalibur® 7018 MR®

ED032589
UltraCore, 50 LB coil

UltraCore® 70C

ED032941
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

UltraCore® 70C Flux-cored (FCAW-G) Wire

ED033066
Coil Adapter 60 lb.

Coil Adapter 60 lb.

K1504-1
Cable Liner for Magnum 550 Series

Cable Liner 5/64-3/32 in (2.0-2.4 mm) 15 ft (4.6 m)

KP45H-332-15

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E70T-5C-JH4
AWS AWS A5.36 E70T5-C1A4-CS1-H4
CWB CSA W48 E490T5-C1A4-CS1-H4 (E492T-5J-H4)

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F)
E70T-5C-JH4 Requirement 100% CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E70T5-C1A4-CS1-H4 Requirement 100% CO2 DC+ or DC- 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 440 (64) 540-590 (78-85) 26 75-172 (55-127) 28-173 (21-128)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %C %Mn %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal
E70T-5C-JH4 Requirement 100% CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 4.0 max.
E70T5-C1A4-CS1-H4 Requirement 100% CO2 DC+ or DC- 0.12 max. 1.75 max. 0.030 max. 0.030 max. 0.90 max. 4 max.
Typical Result 100% CO2 DC+ 0.05-0.08 1.44-1.75 0.016 max. 0.012 max. 0.40-0.60 2-4

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
1/16 in (1.6 mm) 100% CO2 DC+ 19-25 (3/4-1) 5.1 (200) 29-34 230 4.0 (8.7) 3.1 (6.9) 76-86
1/16 in (1.6 mm) 100% CO2 DC+ 19-25 (3/4-1) 6.4 (250) 31-36 270 5.0 (11.0) 3.8 (8.5) 76-86
1/16 in (1.6 mm) 100% CO2 DC+ 19-25 (3/4-1) 7.6 (300) 32-37 295 5.9 (13.1) 4.5 (10.0) 76-86
1/16 in (1.6 mm) 100% CO2 DC+ 19-25 (3/4-1) 8.9 (350) 33-38 335 6.9 (15.2) 5.5 (12.1) 76-86
1/16 in (1.6 mm) 100% CO2 DC+ 19-25 (3/4-1) 10.2 (400) 33-38 360 7.9 (17.4) 6.3 (13.9) 76-86
1/16 in (1.6 mm) 100% CO2 DC+ 19-25 (3/4-1) 12.7 (500) 35-40 415 9.9 (21.8) 7.9 (17.5) 76-86
5/64 in (2.0 mm) 100% CO2 DC+ 25-32 (1-1 1/4) 5.1 (200) 29-34 295 5.7 (12.7) 4.8 (10.5) 82-86
5/64 in (2.0 mm) 100% CO2 DC+ 25-32 (1-1 1/4) 6.4 (250) 30-35 345 7.2 (15.9) 6.0 (13.2) 82-86
5/64 in (2.0 mm) 100% CO2 DC+ 25-32 (1-1 1/4) 7.6 (300) 32-37 390 8.6 (19.0) 7.1 (15.6) 82-86
5/64 in (2.0 mm) 100% CO2 DC+ 25-32 (1-1 1/4) 8.9 (350) 33-38 425 10.1 (22.3) 8.5 (18.7) 82-86
5/64 in (2.0 mm) 100% CO2 DC+ 25-32 (1-1 1/4) 10.2 (400) 34-39 465 11.5 (25.3) 9.9 (21.8) 82-86
3/32 in (2.4 mm) 100% CO2 DC+ 32 (1-3/8) 3.2 (125) 23-28 335 5.5 (12.2) 4.8 (10.7) 87-90
3/32 in (2.4 mm) 100% CO2 DC+ 32 (1-3/8) 5.1 (200) 27-32 445 8.8 (19.3) 7.6 (16.7) 87-90
3/32 in (2.4 mm) 100% CO2 DC+ 32 (1-3/8) 6.4 (250) 29-34 500 10.9 (24.1) 9.6 (21.3) 87-90
3/32 in (2.4 mm) 100% CO2 DC+ 32 (1-3/8) 7.6 (300) 31-36 590 13.2 (29.2) 11.8 (26.0) 87-90
3/32 in (2.4 mm) 100% CO2 DC+ 32 (1-3/8) 8.3 (325) 32-37 605 14.2 (31.4) 12.8 (28.3) 87-90

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.