Przedstawione zdjęcie ma charakter poglądowy i może nie odzwierciedlać rzeczywistego wyglądu produktu.
Średnica / Opakowanie
|
Średnice |
1000 KG Coil |
Beczka 300 KG |
Beczka 350 KG |
Beczka 400 KG |
Szpula 25 KG |
Szpula 100 KG |
Szpula 300 KG |
Szpula 1000 KG |
|---|---|---|---|---|---|---|---|---|
| 2.0 mm | OESD3-2-300AC | OESD3-2-400-CCW | OESD3-2-25VCI | |||||
| 2.4 mm | OESD3-24-1T-CCW | OESD3-24-400 | OESD3-24-25VCI | |||||
| 3.2 mm | OESD3-32-400 | OESD3-32-25VCI | OESD3-32-100 | |||||
| 4.0 mm | OESD3-4-350E,OESD3-4-350E-CCW | OESD3-4-400 | OESD3-4-25VCI | OESD3-4-100R,OESD3-4-100 | OESD3-4-300 | OESD3-4-1T,OESD3-4-1T-CCW |
Wprowadzenie
OE-SD3 is a coppered SAW wire for welding unalloyed steel grades. The wire is especially designed to be used in multi-run applications with OP 121TT to obtain high charpy toughness values even down to -60°C. When OE-SD3 is combined with OP 41TTW the weld metal will keep its strength properties even after a very long PWHT (e.g. 16 hrs at 620 °C).
Zalety
- A low carbon, high manganese, medium silicon wire primarily designed to be used in multirun conditions
- Capable of producing weld deposits with impact properties exceeding 47 J at -62°C when used with OP121TT in As Welded or after post weld heat treatment conditions
- Actual (Type 3.1) certificates for each lot of wire showing chemical composition are available
- Industry standard grade covering a very wide range of requirements
- Wersja o niskiej zawartości Mn dostępna również na życzenie