DETAYLAR
Lincoln 6010 is a cellulosic coated MMA electrode for welding large-diameter pipe lines in the vertical-down position known as "stove -piping". Used for root and hot passes as well as filling and capping up to X52 grade pipe. Also used for root passes on higher-strength pipe steels, up to X 80.
Özellikleri
- Used for root and hot passes as well as filling and capping up to X52 Grades
- Also used for root passes on higher-strength pipe steels, up to X80
- When root pass welding, negative polarity is recommended
- Excellent weldability in all positions
Servis Bilgileri
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Arama sayfası
Test sonucunu görün sorumluluk reddi
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.1 | E6010 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
|---|---|---|---|---|
| E6010 Requirement | 330 (48) min. | 410 (60) min. | 22 min. | 27 (20) min. |
| Typical Result, As-welded | 460-500 (66-73) | 520-570 (75-82) | 25-28 | 64-81 (47-60) |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %Si | %V |
|---|---|---|---|---|---|---|---|
| E6010 Requirement | 0.20 max. | 0.20 max. | 1.20 max. | 0.30 max. | 0.30 max. | 1.00 max. | 0.08 max. |
| Typical Result | 0.09-0.15 | 0.04 max. | 0.28-0.52 | 0.01 max. | 0.02-0.03 | 0.20 | 0.01 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 5/32" (4.0 mm) | DC+ | 135-155 |
| 4.8 mm (3/16") | DC+ | 145-165 |