Das abgebildete Produkt dient nur zu Illustrationszwecken und kann vom tatsächlichen Produkt abweichen.
Durchmesser / Lieferform
|
Durchmesser |
3 x 10 lb Tube |
10 lb (4.5 kg) Plastic Tube |
|---|---|---|
| 1,6 mm (1/16 in) | TG625062638 | |
| 2,4 mm (3/32 in) | TG625093638 |
DETAILS
Techalloy® offers a wide variety of nickel alloy grades of MIG, TIG, and SAW welding products lot tested with certificates of actual wire chemistry and typical mechanical results available online
Eigenschaften
- Ni-Cr-Mo alloy system provides excellent resistance to oxidizing and reducing environments
- The high molybdenum content provides good stress, pitting and crevice corrosion resistance
- Most popular nickel alloy for cladding
- Provides high temperature strength and structural stability
Service Informationen
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS-Suchseite
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.14 | ERNiCrMo-3 |
| ABS | AWS A5.14 | ERNiCrMo-3 |
| CWB | AWS A5.14 | ERNiCrMo-3 |
| MIL | MIL-E-21562E | RN625 |
WIRE COMPOSITION
| Classification | %Al | %C | %Cr | %Cu | %Fe | %Mn | %Mo | %P | %S | %Si | %Ti | %Nb+Ta | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ERNiCrMo-3 Requirement | 0.40 max. | 0.10 max. | 20.0 - 23.0 | 0.50 max. | 5.0 max. | 0.50 max. | 8.0 - 10.0 | 0.02 max. | 0.015 max. | 0.50 max. | 0.40 max. | 3.15 - 4.15 | 58.0 min. |
| Typical Result | 0.08-0.1 | 0.02 max. | 21.7-22.4 | 0.01 max. | 0.3-0.4 | 0.04 max. | 8.6-8.8 | 0.003 max. | 0.001-0.003 | 0.14 max. | 0.17-0.22 | 3.46-3.86 | 64.8 |