The image shown is for representation purposes only and may not reflect the actual product.
DETAILS
Built for the Outdoors!™
Great for anyone who needs portable DC stick welding and AC generator power! The Low-Lift™ grab bars on both ends make lifting the Outback® 185 on and off truck beds easy. The compact Outback® 185 is easy to start with all engine controls on the front of the machine, and it’s easy to use for welding. Use the AC generator power for a variety of applications described below with the large 25.7 litre fuel tank!
Plug in a Lincoln Electric POWER MIG® 180C for MIG & GASLESS welding too.
Plug in a Lincoln Electric TOMAHAWK 30K (with internal compressor) to Plasma Cut Aluminium, Stainless & Steel.
- Low-Lift™ Grab Bars
- More leverage for lifting unit on and off truck beds.
- Extra protection against product damage.
- Best in class feature!
- All Engine Controls on Front Control panel
- Easy access for starting, especially when mounted on truck beds.
- Front panel includes electric start switch and engine choke control.
- Best in class feature!
- 32 mm Diameter Rugged Tube Frame
- Great for all-around sturdy protection.
- Best in class feature!
- 25.7 Litre Fuel Tank
- Less frequent re-fueling, for extended run times.
- Large fuel fill opening for easy re-fueling too!
- Best in class feature!
- Weld with up to 4 mm Stick Electrode
- Up to 185 amps of DC output for many applications.
- 5,700 Watts Peak AC Generator Power (5,200 Watts Continuous).
- Many uses! Grinder, work lights, pump, motor starting, or emergency power.
- Plug in a Lincoln Electric POWER MIG® 180C for wire welding.
- Plug in a Lincoln Electric TOMAHAWK 30K (with internal compressor) to Plasma Cut Aluminium, Stainless & Steel.
Features
- The Outback® 185 engine driven welder has portable 185 AMP DC stick welding with 240VAC generator power.
- Low-Lift™ Grab Bars (Patent Pending)
- All Engine Controls on Front Control Panel
- 32 mm Diameter Rugged Tube Frame
- 25.7 Litre Fuel Tank
- Delivers up to 15 amps continuous power from the 240V AC receptacles.
- RCD Safety Switch, for additional protection from electric shock
- All outlets are circuit breaker protected and are IP66 rated
- Electric Start for Easy Starts with a backup recoil pull start for a weak battery.
- Easy engine maintenance with No oil filter to change, just change oil every 100 hours. .
Service Information
What's Included
- Machine Only
Documentation
You May Also Need
Specifications
Machine Inputs & Outputs
| Phase 1: Rated Output #1A (Current/Voltage/Duty Cycle) | 100A DC / 25V / 100% |
| Phase 1: Rated Output #1B (Current/Voltage/Duty Cycle) | 130A DC / 25V / 60% |
| Phase 1: Rated Output #1C (Current/Voltage/Duty Cycle) | 150A DC / 25V / 20% |
Product Weights & Dimensions
| Dimensions (H x W x D) | 651 mm x 553 mm x 800 mm (25.6 in x 21.8 in x 31.5 in) |
| Net Weight | 125 kg (275 lbs) |
General Specification
| Machines Processes | Stick (SMAW) |
| Mode Icon | CC |
| Output Range | 50-185A DC |
| Polarity | DC |
Machine Technologies & Connections
| Ingress Protection Rating | IP23 |
| Output Range by Mode | 50 - 185 Amps |
| Work Lead Connector Type | Lug |
Engine Driven Welders
| Single Phase Auxiliary Output | 60 Hz single phase 21.7A @ 240V |
| Auxiliary Output Frequency | 60 Hz |
| Engine Brand & Model | Kohler |
| Engine Description | Stick 50 - 185 Amps |
| Engine Horsepower | 14 HP @ 3600 RPM |
| High Idle Operating Speed @ Rated Output | 3600 |
| Fuel Tank Size (US gal.) | 6.8 |
| Fuel Tank Size (L) | 25.7 |
| Oil Capacity (qts.) | 1.2 |
| Oil Capacity (L) | 1.1 |
| Generator Output | 5700 watts peak, 5200 watts continuous 240Vac |
Application
| Typical Application | General Fabrication Maintenance & Repair Repair Welding |
Warranty
| Warranty | 3 Years Parts and Labor - Engine warranted separately by engine manufacturer |