DETAILS
EXCALIBUR® 410NIMO-16 ideally used to overlay mild and low alloy steels, recommended preheat and inter-pass temperatures greater than 300°F (150°C) when welding.
Features
- This electrode can be used to overlay mild and low alloy steels
- Preheat and inter-pass temperatures greater than 300°F (150°C) are recommended during welding
- Post-weld heat treatment should not exceed 1150°F (620°C) as higher temperatures may result in hardening
Typical Applications
- Turbines
- Valve Bodies
- Offshore and High Pressure Piping
- Power Generation
- Welding CA6NM Stainless Steel
Welding Positions
- All except vertical down
Shielding Gas
- N/A
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.4 | E410NiMo-16 |
MECHANICAL PROPERTIES
| Classification |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|
| E410NiMo-16 Requirement | 760 (110) min. | 15 min. |
| Typical Result, 1 hour @ 605°C (1125°F) | 940-980 (136-142) | 18-20 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %Ni | %P | %S | %Si |
|---|---|---|---|---|---|---|---|---|---|
| E410NiMo-16 Requirement | 0.06 max. | 11.0 - 12.5 | 0.75 max. | 1.0 max. | 0.40 - 0.70 | 4.0 - 5.0 | 0.04 max. | 0.03 max. | 0.90 max. |
| Typical Result | 0.04 | 11.4-11.8 | 0.07 | 0.5 | 0.61-0.65 | 4.6-4.7 | 0.03 | 0.01 | 0.19-0.25 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 3/32 in (2.4 mm) | DC+ | 40-80 |
| 3/32 in (2.4 mm) | AC | 40-80 |
| 1/8 in (3.2 mm) | DC+ | 75-110 |
| 1/8 in (3.2 mm) | AC | 75-110 |
| 5/32 in (4.0 mm) | DC+ | 95-150 |
| 5/32 in (4.0 mm) | AC | 95-150 |
| 3/16 in (4.8 mm) | DC+ | 130-200 |
| 3/16 in (4.8 mm) | AC | 130-200 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |