The image shown is for representation purposes only and may not reflect the actual product.
DETAILS
Simple. Reliable. Ranger.
The Ranger 300MP LPG engine driven welder generator excels on the job. The unit’s industry-leading design makes it smaller, lighter and quieter than other machines in its class, while an intuitive user interface with simple controls operation and improve arc control. You can also count on a reliable source of clean generator power to run a variety of tools and sensitive equipment. Check out the features below:
Industry-Leading Design
The Ranger 300MP LPG engine driven welder generator is smaller and quieter compared to other machines in its class.
- Chopper Technology® for smoother starts, steadier arc, better welding performance
- 9.5kW of clean AC generator power accommodates a variety of tools and equipment
- Operate sensitive electronics, like laptops, without concern - this unit delivers clean generator power with 5% Total Harmonic Distortion
- Run generator power and weld at the same time, without interruption
- Compact size and weight allow for more room on your truck for tools and equipment
- Clean AC Generator Power for tools and even sensitive electronics
- Simple, easy to use controls help the job get done faster
- Designed for easy maintenance for quick routine servicing
- Digital, easy to read volt and amp meters
- Built to handle tough jobsite conditions with galvanized steel body for long-term durability
Clean AC Generator Power
Features
Disclaimers
Service Information
What's Included
- (1) Ranger 300MP LPG Engine Driven Welder Generator
Documentation
You May Also Need
Specifications
Product Weights & Dimensions
| Dimensions (H x W x D) | 26.4 in x 20.0 in x 36.4 in (671 mm x 508 mm x 924 mm) |
| Net Weight | 424 lbs (193 kg) |
General Specification
| Machines Processes | Stick (SMAW) Flux-Cored (FCAW) MIG (GMAW) Flux-Cored Self-Shielded (FCAW-S) Flux-Cored Gas-Shielded (FCAW-G) |
| Open Circuit Voltage | 85VDC |
| Number of Operators per Machine | 1 |
Machine Technologies & Connections
| Ingress Protection Rating | IP23 |
| IEC Rating | 250A / 30V / 100% (CC) 272A / 27.6V / 100% (CV) @ 104°F (40°C) |
| Output Range by Mode | 35-300A (CC) 15-30V (CV) |
| Amphenol Pins (type of connector) | 6 |
Battery
| Battery Type | 12V Group 26 500CCA |
Engine Driven Welders
| Single Phase Auxiliary Output | 10,500W Peak 9,500W Continuous 120/240V AC |
| Auxiliary Output Frequency | 60 Hz |
| Receptacle Types | NEMA 5-20R NEMA 6-50R NEMA 14-50R |
| Engine Brand & Model | Rehlko CH730 LP |
| Engine Description | Manual choke, 2 Cylinder, 4 cycle, OHV, Air cooled, Aluminum block with Cast iron cylinder liners |
| Engine Horsepower | 21.5 |
| Engine Block Size & Displacement | 44 cu. in. 725cc |
| High Idle Operating Speed @ Rated Output | 3600 |
| Low Idle Operating Speed | 2500 |
| Oil Capacity (qts.) | 2 |
| Oil Capacity (L) | 1.9 |
| Max OCV | 85VDC |
Application
| Typical Application | Construction Construction & Field Erection General Fabrication Maintenance & Repair Repair Welding Structural Fabrication Structural Welding |
Warranty
| Warranty | 3 Years Parts and Labor - Engine warranted separately by engine manufacturer |