DETAILS
Features
- A low carbon, high manganese wire with nickel and molybdenum designed to weld high strength steels such as HY-80 and HSLA-80
- Delivers yield strength greater than 690 MPa (100 ksi)
- Low H2 hydrogen levels can be achieved when used with MIL800-H™ flux
- Actual (Type 3.1) certificates for each lot of wire showing chemical composition are available in the certificate center of lincolnelectric.com
- Recommended Fluxes: Lincolnweld® 880™ & 880M® & 888™ & MIL800-H™ & MIL800-HPNi™ & 960®
Disclaimers
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.23 | EM2 |
| ISO | ISO | SZ |
WIRE COMPOSITION
| Classification | %C | %Mn | %Si | %Cr | %Ni | %Mo | %Ti | %Zr | %Al | %V | %S | %P | %Cu |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EM2 Requirement | 0.10 max. | 1.25-1.80 | 0.02-0.60 | 0.30 max. | 1.40-2.10 | 0.25-0.55 | 0.10 max. | 0.10 max. | 0.10 max. | 0.05 max. | 0.015 max. | 0.010 max. | 0.25 max. |