DETAILS
SuperGlaze® 5356 Aluminum Magnesium filler rod is very commonly used for higher strength welding of 5XXX and 6XXX base materials. Its higher columnar strength offers improved feeding.
Features
- General purpose filler alloy for welding 5XXX series alloys
- The most widely used aluminum-magnesium welding alloy
- High strength filler metal
- AluMAXTM compatible: 0.072 in. (1.8 mm) Gem-Pak® compatible with AluMAX™ welding process for higher deposition and faster travel speeds
- Q2 Lot® - Certificate showing actual wire composition
Typical Applications
- Shipbuilding
- General fabrication
- Trailer Manufacturing
Welding Positions
- All, except vertical down
Shielding Gas
- 100% Argon, Argon / Helium Mixtures, Flow Rate: 30 - 50 CFH
Special Features
- Q2 Lot® Certificate - Certified Material Test Report showing actual wire composition
Disclaimers
Service Information
Documentation
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.10 | ER5356 |
WIRE COMPOSITION
| Classification | %Be | %Cr | %Cu | %Fe | %Mg | %Mn | %Si | %Ti | %Zn |
|---|---|---|---|---|---|---|---|---|---|
| ER5356 Requirement | 0.0003 max. | 0.05 - 0.20 | 0.10 max. | 0.40 max. | 4.5 - 5.5 | 0.05 - 0.20 | 0.25 max. | 0.06 - 0.20 | 0.10 max. |
| Typical Result | 0.0002 max. | 0.12 | 0.00 | 0.11 | 4.9 | 0.12 | 0.06 | 0.10 | 0.01 |