Beginner Tips and Tricks
Simple shop-tested advice designed to improve weld quality, productivity, and consistency.
Give it a Rest
Sometimes, when there is quite a bit of MIG (GMAW) welding, the possibility exists that your glove can get caught at a particular spot, interfering with your pass. To keep this from happening, fabricate a U-shaped metal hand rest on wheels sitting on a track. By resting your hand on this device, you’ll be able to move back and forth easily and weld without hindrance.
Make Sure You Stock Up
When MIG welding, it’s a good practice to keep a couple of welding tips on hand. Burn back and a plugged tip could mean the difference between working and not working.
Scrap is not Junk
Save your scrap metal. Put any material you cut into a bin, because a suitable piece of scrap metal could be used as a patch in a future project.
A Delicate Touch is Needed
For the MIG beginner, don’t hold the torch too tightly. You want to be able to make small position adjustments as needed, and it’s much easier to do so if your torch hand and wrist are not locked into position because you’re gripping the torch handle too tightly.
Long Distance Runner
When practice welding with MIG, I find it useful to extend the wire to the length of my coupon, then cut and tack it to my workpiece. This will help you practice running a straight bead over long distances.