Master Class

Master Class | Monday, October 8, 2018 | United States



This masterclass explores the key surface welding processes used to improve wear resistance, restore dimensions, and protect components from corrosion and damage.

Master Class Department Header

Build-up

Build-up is used to restore worn or undersized parts back to a desired dimension by depositing layers of weld metal to the surface of the base metal. Build-up welds are typically similar to the base metal in chemistry and hardness, and are not intended to prevent wear or corrosion. There are times when extra build up material would be required to allow for machining to a specific size. In some cases, build-up might be left undersized to allow for one or more additional layers of a material that has resistance to wear or corrosion.

Hardfacing

Hardfacing is accomplished by depositing a hard, wear-resistant layer or beads of weld metal to the surface of base metals subjected to wear. There are a number of different types of wearing environments, so hard-surfacing products are usually selected based on the type of wear that the product will be subjected to in service. For example, some hard-surfacing products are designed for severe abrasion, while others are better for impact. Some hard-surfacing products have certain limitations on how many layers can be deposited.

Buttering

Buttering is a process of depositing a transition layer of weld metal to the surface of the base metal. The process is sometimes used for joining dissimilar metals, or to create a cushion layer of ductile material before adding a hardsurfacing product. An example of buttering would be depositing a mild steel filler metal on a high carbon steel before hard facing is applied.

Cladding

Cladding sometimes refers to a process that involves the adding of a corrosion-resistant plate to the surface of an alloy steel or carbon steel to improve corrosion resistance of the base metal. Most of the welding processes could be used to apply cladding materials. One example would be explosion welding nickel alloy sheets to high-strength steel plate. Another common way to apply cladding would be to use an arc welding process to create a surface weld. Stainless or nickel alloys are commonly selected for their ability to resist various types of corrosion. Another common application for cladding is the deposit of copper alloys such as brass or bronze onto a bearing surface to prevent galling between two sliding metal surfaces.

Surface welding is the general term that encompasses a variety of different processes. All of these processes involve the application of weld metal to the surface of the base metal to strengthen, add thickness, improve corrosion resistance and more. Your intended use for the base metal will determine which surfacing process you should use.

image
Master Class: Preheating Steel
image
image
image

Getting Past the Surface

The layman, and even the moderately experienced welder, usually thinks of welding in its simple terms – the process of joining two or more pieces of material together using a fillet or groove weld. However, the surface weld serves a different purpose. Surface welding, a process frequently used in industry, is not the joining of metal together. Instead, surface welding is a process that involves the depositing of beads or layers of weld metal on the surface of the base metal.

Surface welding is actually a broad term used to describe any of the following processes:

image