DLF-84 Single Boom Wire Drive
DLF-84 Single Boom Wire Drive
照片仅做参考,请以最终实物为准

DLF-84 Single Wire Drive Boom Mount Feeder - No U/I

K5703-1

DLF-84 wire drive for use with Flex Feed 84 control box for boom mounted configurations

输入

输入

详情

The DLF-84 boom feeder is the ideal feeder to pair with Flextec power sources for *Pulsed MIG, as well as, CV-MIG welding applications. Designed to combine the latest welding innovation with easy, operator-focused control features, this wire feeder/power source solution delivers the benchmark of simplicity and performance. Pair with a compatible Lincoln Electric push-pull gun for superior aluminum performance.

产品特性

  • Simple System Configuration – Includes integrated 5-pin ArcLink control cable and .035/.045 drive rolls.
  • Simple to Use – For synergic setup, choose desired weld process, wire type, wire diameter and gas type.
  • Synergic weld modes – one knob control. Set higher wire feed speeds for thicker materials and lower wire feed speeds for thinner materials. Voltage is automatically adjusted. (requires synergic compatible Flextec)
  • Pulsed MIG Support – with pulse supporting Flextec power source – lower spatter, greater puddle control. (requires pulse compatible Flextec)
  • Auto Settings – run-in speed, pre-flow, post-flow, burn-back are auto-set based on setup configuration. (requires auto-settings compatible Flextec)
  • Memories – up to four stored weld schedules for easy changes between different welds. Easily configurable from 1-4 memories.
  • Limits/Lockouts – reduces chance of accidental welding out of procedure.
  • Customizable Start and Crater Settings – greater control over weld profile at start and end of weld.
  • Push-pull capable with 12-pin connection kit.

服务支持

包含

  • (1) Integrated ArcLink Control Cable 8 ft.

规格

产品重量和尺寸

高度(in) 22.5
高度(mm) 572
宽度(in) 20
宽度(mm) 508
长度(in) 15.5
长度(mm) 394
重量(lbs) 24
重量(kg) 11

送丝机

送丝轮数量 4 rolls
送丝机类型 Boom
配置 Single
通信技术 ArcLink
最大额定输出能力 600A
最大线径(实心焊丝) 1/8 in (3.2 mm)
最大线径(药芯焊丝) 3/64 in (1.2 mm)
最大送丝速度 1200IPM
焊丝配置 Single
最大焊丝盘承重(lbs) 60
最大焊丝盘承重(kg) 30
送丝机电流 600
送丝机暂载率 0.6

基础规格

输入功率 40 VDC
输出范围 600 A @ 60%

应用

典型应用 一般制造
重型设备
重工

质保

质保 3 Years