照片仅做参考，请以最终实物为准
Cruiser® 埋弧焊小车
K3048-2
Cruiser® 埋弧焊小车
型号
选择型号
-
Cruiser® 埋弧焊小车
Cruiser® 埋弧焊小车
K3048-2
林肯电气商务伙伴
登录查看专属价格详情
Cruiser® 埋弧焊小车
产品特性
- 可靠操作 - 牢固的焊接基架。一根坚固的钢制立柱可满足生产现场日常使用。铸造车轮配备高温防滑橡胶轮胎。坚固的导管及夹具设计 - 无难度的送丝组件安装。
- Advanced Control Pendant - Removable, lightweight, impact-resistant aluminum user interface can be used to save procedures and apply limits and lockouts for any or all controls.
- Common Expendable Parts - All drive rolls, nozzles, contact tips and wire straighteners are shared with the MAXsa® submerged arc wire drives.
- Multiple Configurations - a flexible system that allows setup with or without a track and three- or four-wheel operation.
- 行业领先的售后服务
有关Power Wave® 高级工艺焊接系统的可用焊接工艺和波形以及软件更新详细信息的完整列表，请访问：
www.PowerWaveSoftware.com
包含
- Conduit Tubing – 5 ft. (1.5 m)
- 5/32 in. (4.0 mm) 600 Amp Contact Nozzle Assembly
- 5/32 in. (4.0 mm) Contact Tip
- Nozzle Extension – 5 in. (127 mm)
- Curved Nozzle Extension 45°
- Nozzle Extension Insulator
- Flux Tubing
- Flux Hose Clamps
- Wire Reel Assembly
- Wheels for Track Operation
- Cross Slide Assembly
- Front and Rear Outriggers
- Enclosed Wire Reel (2)
- Note: Control cable not included.