详情
LINCORE® FROG MANG® 是铁路行业中锰蛙和锰交叉金刚石修复的理想选择，提供无限的层数，具有适当的预热和层间温度和程序。
产品特性
- 专为修复铁路行业的锰蛙和锰穿越金刚石而设计。
- 高合金奥氏体锰钢熔敷金属
- 使用适当预热和层间温度的焊接工艺时，不限层数
典型应用
- 锰交叉钻石
- 高锰钢铁路辙叉焊接
焊接位置
- 平焊及横焊
您可能还需要
SDS信息 SDS 搜索页面
参考实验结果 免责声明
MECHANICAL PROPERTIES
| Classification | Hardness Rockwell C |
|---|---|
| Typical Result | 20-30 |
| Typical Result, Work-hardened | 40-50 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Si |
|---|---|---|---|---|
| Typical Result | 2.0 max. | 10.0 max. | 30.0 max. | 1.0 max. |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
ESO
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Deposition Rate
kg/hr (lb/hr) |
|---|---|---|---|---|---|---|
| 1/16 in (1.6 mm) | DC+ | 25 (1) | 5.1 (200) | 27 | 220 | 3.0 (6.7) |
| 1/16 in (1.6 mm) | DC+ | 25 (1) | 6.4 (250) | 29 | 250 | 4.0 (8.7) |
| 1/16 in (1.6 mm) | DC+ | 25 (1) | 8.3 (325) | 32 | 300 | 5.3 (11.6) |
| 5/64 in (2.0 mm) | DC+ | 32 (1 1/4) | 3.8 (150) | 27 | 240 | 3.4 (7.4) |
| 5/64 in (2.0 mm) | DC+ | 32 (1 1/4) | 5.1 (200) | 29 | 290 | 4.9 (10.7) |
| 5/64 in (2.0 mm) | DC+ | 32 (1 1/4) | 6.4 (250) | 31 | 340 | 6.4 (14.0) |
NOTES
| Note |
|---|
| Remove all damaged and foreign material by the air-carbon arc gouging process and grinding. Ensure all defective metal is removed. |
| In the event hairline cracks remain at flangeway depth, use a 1/8 in diameter E308 stainless electrode, to tie up these cracks and avoid hot cracking during the buildup process. |
| Use only light amounts and do not build-up with E308 stainless. It is for use in emergency situations where no other alternative is available to repair flangeway cracks. |
| As with all austenitic manganese welding products, interpass temperatures should be limited to 260°C (500°F) maximum. |
| A stringer bead, or at most, a slight weave is recommended to limit heat build-up. Excessive heat build-up causes manganese carbide precipitation that damages the toughness of austenitic manganese. |