照片仅做参考，请以最终实物为准
直径 / 包装
|
直径 |
|---|
详情
SuperGlaze 5087 is used where higher tensile strength is required in base metals with up to 5% Mg
产品特性
- Designed to meet the tensile strength requirements of high magnesium alloys
- For base metals with a max. of 5% Mg
- The presence of Zirconium produces a fine-grained weld metal structure
- Reduced tendency of solidification cracking in highly restrained welds
典型应用
- Marine
- Cryogenic Applications
- Shipbuilding
- Automotive
- Railway Industry
焊接位置
- All except vertical down
保护气体
- 100% Argon Argon / Helium Mixtures Flow Rate: 30 - 50 CFH
产品优势
- Q2 Lot® Certificate - Certified Material Test Report showing actual wire composition
SDS信息 SDS 搜索页面
参考实验结果 免责声明
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.10 | ER5087 |
WIRE COMPOSITION
| Classification | %Be | %Cr | %Cu | %Fe | %Mg | %Mn | %Si | %Ti | %Zn | %Zr |
|---|---|---|---|---|---|---|---|---|---|---|
| ER5087 Requirement | 0.0003 max. | 0.05 - 0.25 | 0.05 max. | 0.40 max. | 4.5 - 5.2 | 0.7 - 1.1 | 0.25 max. | 0.15 max. | 0.25 max. | 0.10 - 0.20 |
| Typical Result | 0.0002 max. | 0.07 | 0.00 | 0.13 | 4.9 | 0.7 | 0.06 | 0.01 | 0.00 | 0.12 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Gas Flow
L/min (CFH) |
Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|---|---|---|
| 0.9 mm (.035") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 19.6 (770) | 21.6 | 185 |
| 1.2 mm (3/64") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 12.7 (500) | 23.0 | 210 |
| 1.6 mm (1/16") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 9.1 (360) | 24.8 | 280 |
| 2.4 mm (3/32") | 100% Ar | 85 (180) | DC+ | 19.0 (³/₄) | 8.0 (315) | 28.0 | 500 |
| 3.2 mm (1/8") | 100% Ar | 85 (180) | DC+ | 19.0 (³/₄) | 5.1 (200) | 30.3 | 535 |