选项 关闭
SuperGlide MIG wire, Steel Spool
照片仅做参考，请以最终实物为准

直径 / 包装

直径
 44 lb 盘装
0.045 in (1.1 mm) ED028636

SuperGlide® S6

气体保护焊

等级:
ER70S-6

SuperGlide® S6 是一种优质无镀铜的低碳钢 MIG 焊丝，适用于焊接中度到高度氧化皮的母材。

直径

选择直径

  • 0.045 in (1.1 mm)

包装

选择包装

  • 44 lb 盘装

详情

Lincoln 的优质无镀铜低碳钢 MIG 焊丝 SuperGlide® S6 是在中度到高度氧化皮含量的金属上焊接的绝佳选择。

产品特性

  • 可用于轻度氧化皮的母材焊接
  • Microguard® Ultra 提供卓越的送丝和电弧稳定性
  • 无镀铜焊丝减少含铜烟尘产生
  • 支持短路、球状、轴向喷射和脉冲喷射过渡

典型应用

  • 中至厚氧化皮基材焊接
  • 屈服强度380-485MPa（55-70 ksi）的薄板焊接
  • 汽车维修焊接

焊接位置

  • 全位置

保护气体

  • 100% CO2|混合气保护

服务支持

文档

您可能还需要

20 lb Plastic Spool SuperGlaze or SuperGlaze HD Aluminum MIG Wire

SuperGlaze® 4043

ED029234
Product Image Not Present

Magnum® 导电嘴 .045 in (1.2 mm) - 10/pack

KP14-45
Drive Roll and Guide Tube Kit

送丝轮套件（实心焊丝）.045 in (1.1 mm)

KP1696-045S
Magnum Gun Liner

导丝管 .035-.045 in (0.9-1.2 mm) 15 ft (4.6 m)

KP42-4045-15
Gas Diffuser

MAGNUM 焊枪气体分流器 025-045, MAGNUM GUN(52FN)

KP52FN

SDS信息 SDS 搜索页面

参考实验结果 免责声明

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.18 ER70S-6
CWB CSA W48 B-G 49A 3 C1 S6 (B-G 49A 3 C G6)

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
ER70S-6 Requirement 100% CO2 DC+ 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 470 (68) 530-580 (77-84) 26 56-112 (42-83)

WIRE COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Total Cu
ER70S-6 Requirement 0.06 - 0.15 0.15 max. 1.40 - 1.85 0.15 max. 0.15 max. 0.025 max. 0.035 max. 0.80 - 1.15 0.03 max. 0.50 max.
Typical Result 0.07-0.08 0.02 1.41-1.49 0.01 max. 0.01 0.006 0.007 0.80-0.90 0.003 max. 0.02

TYPICAL OPERATING PROCEDURES

Diameter Transfer Mode Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr)
0.035 in (0.9 mm) Short Circuit Transfer ⁽²⁾ 100% CO2 DC+ 9-12 (3/8-1/2) 2.5 (100) 18 80 0.7 (1.6)
0.035 in (0.9 mm) Short Circuit Transfer ⁽²⁾ 100% CO2 DC+ 9-12 (3/8-1/2) 3.8 (150) 19 120 1.1 (2.4)
0.035 in (0.9 mm) Short Circuit Transfer ⁽²⁾ 100% CO2 DC+ 9-12 (3/8-1/2) 6.4 (250) 22 175 1.8 (4.0)
0.035 in (0.9 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-19 (1/2-3/4) 9.5 (375) 23 195 2.7 (6.0)
0.035 in (0.9 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-19 (1/2-3/4) 12.7 (500) 29 230 3.6 (8.0)
0.035 in (0.9 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-19 (1/2-3/4) 15.2 (600) 30 275 4.4 (9.6)
0.045 in (1.1 mm) Short Circuit Transfer ⁽²⁾ 100% CO2 DC+ 12-19 (1/2-3/4) 3.2 (125) 19 145 1.5 (3.4)
0.045 in (1.1 mm) Short Circuit Transfer ⁽²⁾ 100% CO2 DC+ 12-19 (1/2-3/4) 3.8 (150) 20 165 1.8 (4.0)
0.045 in (1.1 mm) Short Circuit Transfer ⁽²⁾ 100% CO2 DC+ 12-19 (1/2-3/4) 5.1 (200) 21 200 2.4 (5.4)
0.045 in (1.1 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-19 (1/2-3/4) 8.9 (350) 27 285 4.2 (9.2)
0.045 in (1.1 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-19 (1/2-3/4) 12.1 (475) 30 335 5.7 (12.5)
0.045 in (1.1 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-19 (1/2-3/4) 12.7 (500) 30 340 6.0 (13.2)

NOTES

Note
⁽¹⁾ CTWD (Contact Tip to Work Distance). Subtract 1/4 in. (6.4 mm) to calculate Electrical Stickout.
⁽²⁾ Procedures in these areas are procedures for short circuiting mode using 100% CO2. When using 75% Argon, 25% CO2 for short circuit transfer, reduce voltage by 1 to 2 volts.