Menu Close
Dry packaging LINCOLN stick electrode (VPMD)
The image shown is for representation purposes only and may not reflect the actual product.

Diameters / Packaging

Diameters
 VPMD 12 KG (6 x 2 KG, approx. 348 pcs)
 VPMD 15,6 KG (6 x 2,6 KG, approx. 228 pcs)
3.2x350 mm CH9B9-32-3
4.0x450 mm CH9B9-40-3

CHROMET® 9-B9

Stick (SMAW) | CH9B9-40-3

CLASSIFICATIONS:
AWS A5.5M : E9015-B91 H4
BS EN ISO 3580-B : E 6216-9C1MV

Stick electrode CHROMET® 9-B9 - 4.0x450 mm - VPMD 15.6 KG (approx. 228 pcs)

Diameter

Select Diameter

  • 3.2x350 mm
  • 4.0x450 mm

Package

Select Package

  • VPMD 15,6 KG (6 x 2,6 KG, approx. 228 pcs)

DETAILS

CHROMET 9-B9 are low alloy, low hydrogen stick electrodes designed specifically for high integrity structural service at elevated temperature. Typical applications include main steam piping, oil refineries, coal liquefaction plants, power generation plants, and turbine castings.

Features

  • Stick electrode manufactured to the requirements of AWS A5.5 E9015-B9 and BS EN ISO 3580-B
  • Moisture resistant coatings giving very low weld metal hydrogen levels
  • Specifically designed for high integrity structural service at elevated temperature
  • Weld metal chemistry is low in impurity elements allowing it to respect the X Factor (<15ppm) and J-factor (<120ppm)
  • 3.1 Tested: Actual weld composition and mechanical properties (items in Vacuum Pack only)

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E9015-B91 H4
ISO ISO 3580-B E 6216-9C1MV

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E9015-B91 H4 Requirement 530 (77) min. 620 (90) min. 17 min.
E 6216-9C1MV Requirement 530 (77) min. 620 (90) min. 15 min.
Typical Result, Stress relieved 590 (86) 710 (103) 22

DEPOSIT COMPOSITION

Classification %Al %C %Cr %Mn %Mo %N %Nb %Ni %P %S %Si %Total Cu %V %Mn+Ni
E9015-B91 H4 Requirement 0.04 max. 0.08 - 0.13 8.0 - 10.5 1.20 max. 0.85 - 1.20 0.02 - 0.07 0.02 - 0.10 0.80 max. 0.01 max. 0.01 max. 0.30 max. 0.25 max. 0.15 - 0.30 1.40 max.
E 6216-9C1MV Requirement 0.04 max. 0.08 - 0.13 8.0 - 10.0 1.25 max. 0.85 - 1.20 0.02 - 0.07 0.02 - 0.10 1.0 max. 0.01 max. 0.01 max. 0.30 max. 0.25 max. 0.15 - 0.3 1.50 max.
Typical Result 0.01 0.10 9.0 0.55 1.00 0.05 0.04 0.30 0.01 0.01 0.25 0.05 0.20 0.85

TYPICAL OPERATING PROCEDURES

Diameter Current
Amps
2.5 mm (3/32") 70-110
3.2 mm (1/8") 80-140
4.0 mm (5/32") 100-180
5.0 mm 140-240