Menu Close
25lb plastic spool Innershield NR-305
The image shown is for representation purposes only and may not reflect the actual product.

Diameters / Packaging

Diameters
 33 lb Spool
 500 lb Accu-Trak® Drum
0.045 in (1.1 mm) ED033910 ED033913
0.052 in (1.3 mm) ED033911 ED033914
1/16 in (1.6 mm) ED033912 ED033915

Metalshield® MC®-110

Metal-Cored Gas-Shielded (GMAW-C)

CLASSIFICATIONS:
E110C-K4 H4
E110T15-M20A6-K4-H4

Metalshield® MC®-110 from Lincoln Electric is a low alloy metal cored wire capable of producing welds with tensile strengths of 760 MPa (110 ksi).

Diameter

Select Diameter

  • 0.045 in (1.1 mm)
  • 0.052 in (1.3 mm)
  • 1/16 in (1.6 mm)

Package

Select Package

  • 33 lb Spool
  • 500 lb Accu-Trak® Drum
Buy Now

DETAILS

Metalshield® MC®-110 from Lincoln Electric is a low alloy metal cored wire capable of producing welds with tensile strengths of 760 MPa (110 ksi).

Features

  • H4 diffusible hydrogen levels
  • Low spatter and excellent arc stability
  • Deoxidizing agents minimize pre- and post-weld clean up
  • Enhanced silicon island management
  • Low temperature impact properties - charpy V-notch test results capable of exceeding 40 J (30 ft·lbf) at -51°C (-60°F)
  • Excellent bead shape and profile

Typical Applications

  • Robotics/hard automation
  • HSLA and quenched and tempered steels (i.e., HY-100 and ASTM 514)
  • Crane fabrication
  • Heavy equipment
  • Pressure vessels

Welding Positions

  • All

Shielding Gas

  • Mixed Shielding Gas

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

Documentation

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.28 E110C-K4-H4
AWS AWS A5.36 E110T15-M20A6-K4-H4, E110T15-M21A6-K4-H4
CWB CWB/CSA E110C-K4 H4
ISO ISO T76 6 T15-0 M A-N4C1M2 H5

MECHANICAL PROPERTIES

Classification Shielding Gas Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Charpy V-Notch
J (ft-lbs) @ -51°C (-60°F)
E110C-K4-H4 680 (98) min. 760 (110) min. 15 min. Not Specified 27 (20) min.
E110T15-M20A6-K4-H4 Requirement 680 (98) min. 760-900 (110-130) 15 min. Not Specified 27 (20) min.
Typical Result, As-welded 75% Ar, 25% CO2 690-795 (100-115) 760-825 (110-120) 20-24 60-88 (44-65) 45-80 (34-59)
Typical Result, As-welded 90% Ar, 10% CO2 725-825 (105-120) 790-895 (115-130) 18-23 66-95 (48-70) 59-82 (44-61)

DEPOSIT COMPOSITION

Classification Shielding Gas %C %Mn %Si %S %P %Cu %Ni %Cr %Mo %V Diffusible Hydrogen
mL/100g Weld Metal
E110C-K4-H4 Requirement 0.15 max. 0.75-2.25 0.80 max. 0.025 max. 0.025 max. 0.35 max. 0.50-2.50 0.15-0.65 0.25-0.65 0.03 max. 4.0 max.
E110T15-M20A6-K4-H4 Requirement 0.15 max. 1.20-2.25 0.80 max. 0.030 max. 0.030 max. Not Specified 1.75-2.60 0.20-0.60 0.25-0.65 0.03 max. 4 max.
Typical Result 75% Ar, 25% CO2 0.05-0.08 1.45-1.75 0.45-0.65 0.01-0.02 0.01-0.02 0.02-0.06 2.00-2.20 0.20-0.35 0.45-0.55 0.01-0.02 2.5-4
Typical Result 90% Ar, 10% CO2 0.05-0.08 1.45-1.75 0.45-0.65 0.01-0.02 0.01-0.02 0.02-0.06 2.00-2.20 0.20-0.35 0.45-0.55 0.01-0.02 2.5-4

TYPICAL OPERATING PROCEDURES

Diameter in (mm) Polarity Shielding Gas CTWD⁽¹⁾ mm (in) Wire Feed Speed m/min (in/min) Voltage (volts) Current (amps) Melt-Off Rate kg/hr (lb/hr) Deposition Rate kg/hr (lb/hr) Efficiency (%)
0.045 (1.1) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 5.1 (200) 22-24 170 2.4 (5.3) 2.2 (4.7) 88
0.045 (1.1) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 6.4 (250) 24-26 190 3.0 (6.7) 2.8 (6.1) 91
0.045 (1.1) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 8.9 (350) 26-28 240 4.2 (9.2) 3.8 (8.4) 91
0.045 (1.1) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 11.4 (450) 28-30 290 5.4 (11.8) 5.1 (11.3) 95
0.045 (1.1) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 14.0 (550) 30-32 330 6.5 (14.4) 6.3 (13.9) 97
0.045 (1.1) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 16.6 (650) 31-33 370 7.8 (17.1) 7.6 (16.7) 97
0.052 (1.3) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 5.1 (200) 23-25 225 3.2 (7.0) 2.8 (6.2) 89
0.052 (1.3) DC+ 90% Ar, 10% CO2 19-25 (3/4-1)) 6.4 (250) 25-27 255 4.0 (8.8) 3.7 (8.1) 92
0.052 (1.3) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 8.9 (350) 27-29 295 5.5 (12.2) 5.3 (11.6) 95
0.052 (1.3) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 11.4 (450) 29-31 350 7.2 (15.8) 7.0 (15.4) 98
0.052 (1.3) DC+ 90% Ar, 10% CO2 19-25 (3/4-1) 14.0 (550) 30-32 400 8.7 (19.1) 8.5 (18.8) 98
1/16 (1.6) DC+ 90% Ar, 10% CO2 25-32 (1-1 1/4) 5.1 (200) 24-26 270 4.4 (9.6) 3.9 (8.6) 89
1/16 (1.6) DC+ 90% Ar, 10% CO2 25-32 (1-1 1/4) 6.4 (250) 26-28 320 5.4 (12.1) 5.1 (11.3) 94
1/16 (1.6) DC+ 90% Ar, 10% CO2 25-32 (1-1 1/4) 8.9 (350) 28-30 385 7.7 (16.9) 7.4 (16.4) 97
1/16 (1.6) DC+ 90% Ar, 10% CO2 25-32 (1-1 1/4) 11.4 (450) 30-32 465 9.8 (21.6) 9.6 (21.2) 98

NOTES

Name
⁽¹⁾ To estimate ESO, subtract 3/16 in (4.8 mm) from CTWD.
NOTE: Consult steel manufacturer’s recommendations regarding minimum and maximum pre-heat temperature, interpass temperature, and heat input.